Fullsac headers with FP3
#1
Fullsac headers with FP3
Hey guys, does anyone know if a Fullsac Sport headpipe will give you less exhaust reversion and less crosstalk between the O2 sensors than a decated factory headpipe? I'm having trouble autotuning my '15 Street Glide, no matter what maps I try on the FP3 fuelpack. I'm running the Fullsac headers, Cobra 3"Racepro slipons and Arlen Ness stage 1 air filter. Bike runs good once it's going, sounds and feels like s**t when it's in traffic or just idling. Running temp is around 260-270 when riding but, jumps to about 300+ in slow traffic and red lights. I've made the fuel/air mixture a little richer, 13.9 to 1 across most of the table on several of the maps I've tried from V&H. Whether or not I autotune seems to make no difference on the idle or the temperature. Are my expectations just set too high for this type of engine and bike? I thought a well designed aftermarket headpipe and a fuel tuner would reduce my temps and make my bike run smoother. I think it ran better when it was stock.
#2
If it was me, I'd give Steve a quick phone call.
I'm guessing he'd say to try a different muffler, probably be best to go with one of his offerings like a CVO body, ( would look a lot better on a touring bike than a 3" muffler imho), and his 1.75" or max 2" cores and then give V&H a call back and they would recommend a good starting map to begin the auto tune process with.
I'm guessing he'd say to try a different muffler, probably be best to go with one of his offerings like a CVO body, ( would look a lot better on a touring bike than a 3" muffler imho), and his 1.75" or max 2" cores and then give V&H a call back and they would recommend a good starting map to begin the auto tune process with.
#4
Hey guys, does anyone know if a Fullsac Sport headpipe will give you less exhaust reversion and less crosstalk between the O2 sensors than a decated factory headpipe? I'm having trouble autotuning my '15 Street Glide, no matter what maps I try on the FP3 fuelpack. I'm running the Fullsac headers, Cobra 3"Racepro slipons and Arlen Ness stage 1 air filter. Bike runs good once it's going, sounds and feels like s**t when it's in traffic or just idling. Running temp is around 260-270 when riding but, jumps to about 300+ in slow traffic and red lights. I've made the fuel/air mixture a little richer, 13.9 to 1 across most of the table on several of the maps I've tried from V&H. Whether or not I autotune seems to make no difference on the idle or the temperature. Are my expectations just set too high for this type of engine and bike? I thought a well designed aftermarket headpipe and a fuel tuner would reduce my temps and make my bike run smoother. I think it ran better when it was stock.
I run (2011 RK) an Fp3 canned map with decatted head pipe, Naked V02 stage 1 a/f and RCX 4" cans. It tunes fine in auto tune and with the canned map. Something is wrong, mufflers(lack of back presure) vacumn leak, down load incomplete. Many tuning TC's with Fullsac sport pipes with good results. A 2" baffle will work the best
Last edited by checkers; 03-16-2017 at 08:59 PM.
#5
Hi tpcowfish, Yeah, I've had this set up for over a year and have become quite familiar with how the autotune feature works. I usually autotune for a few hundred miles on a few different rides and I flash the map when I have populated a decent amount of cells(green). I ride around for a while and see if there's an improvement over the previous map. If not, I delete the map and start autotuning another V&H canned map. Trouble is, I haven't found that perfect map yet. I just don't like the way the bike idles and how high the head temps go when riding slow and in stop and go traffic. Like I said, maybe my expectations are too high.
To answer checkers question: 3" is the diameter of the pipe, they have 2" constant velocity cores, should be enough for back pressure, I'd imagine.
To answer checkers question: 3" is the diameter of the pipe, they have 2" constant velocity cores, should be enough for back pressure, I'd imagine.
#7
Hi tpcowfish, Yeah, I've had this set up for over a year and have become quite familiar with how the autotune feature works. I usually autotune for a few hundred miles on a few different rides and I flash the map when I have populated a decent amount of cells(green). I ride around for a while and see if there's an improvement over the previous map. If not, I delete the map and start autotuning another V&H canned map. Trouble is, I haven't found that perfect map yet. I just don't like the way the bike idles and how high the head temps go when riding slow and in stop and go traffic. Like I said, maybe my expectations are too high.
To answer checkers question: 3" is the diameter of the pipe, they have 2" constant velocity cores, should be enough for back pressure, I'd imagine.
To answer checkers question: 3" is the diameter of the pipe, they have 2" constant velocity cores, should be enough for back pressure, I'd imagine.
The following users liked this post:
summitgmc (03-18-2017)
Trending Topics
#8
#9