Bassani 2x2 dual head pipe pn#1F14A
#14
Help
I put one on my 2016 FLHX. Fit perfect withe exception of the crossover pipe that feeds the left side muffler. Had to do a little tweak to get the bolt that goes through the bracket( that is welded to the pipe) to thread into the oil pan.
The Harley bracket wraps around the pipe and can be moved. Heat shields fit well and no leaks at all.
2 things I liked about the kit were, that it comes with both sets of O2 bungs. Stock location (narrow band) and wide band up by the exhaust ports. It has plugs for both.
Also the crossover pipe that runs from the right side to the left side feeding the left muffler, is a round full sized pipe and not the piece Harley installs that looks like someone smashed it with a sledge hammer! Not sure why Harley chose to do that seeing as the oil pan hangs down lower than the pipe anyway.
The Harley bracket wraps around the pipe and can be moved. Heat shields fit well and no leaks at all.
2 things I liked about the kit were, that it comes with both sets of O2 bungs. Stock location (narrow band) and wide band up by the exhaust ports. It has plugs for both.
Also the crossover pipe that runs from the right side to the left side feeding the left muffler, is a round full sized pipe and not the piece Harley installs that looks like someone smashed it with a sledge hammer! Not sure why Harley chose to do that seeing as the oil pan hangs down lower than the pipe anyway.
#15
#16
Thread
Thread Starter
Forum
Replies
Last Post