Anyone running Bassani Road Rage B4 2-1
#1
Anyone running Bassani Road Rage B4 2-1
Hey everyone,
I did find some older threads on here from 2010, but I wanted to revisit this setup with folks that may have 2014+ bikes. I have been doing a lot of research, mostly with my ears on youtube (terrible) on what pipe to get.
Anyone running a road rage with just a high flow a/c and tuner, I was hoping some of you are using the fp3 with it. If so how is it working out for you?
My other option for a pipe would be the fatcat - going to stick with the fp3 for a tuner since I've had prior experience with it.
I did find some older threads on here from 2010, but I wanted to revisit this setup with folks that may have 2014+ bikes. I have been doing a lot of research, mostly with my ears on youtube (terrible) on what pipe to get.
Anyone running a road rage with just a high flow a/c and tuner, I was hoping some of you are using the fp3 with it. If so how is it working out for you?
My other option for a pipe would be the fatcat - going to stick with the fp3 for a tuner since I've had prior experience with it.
#2
I have the same question. My mechanic says my current pipes are causing a hp problem. 2007 Ultra bored to 107, ported and polished heads, Fueling 543 gear drive cams ProVision tune, Freedom Performance headers and slip ons. On the dyno 2 days ago showed 97 hp, 113 torque. Mechanic says Bassani 2 into 1 will get me 115hp/119torque.
What do you guys think?
What do you guys think?
#3
The following users liked this post:
mndelrosario (09-17-2016)
#4
That is great to hear thank you. I'm going to get those pipes except grab the fp3 because it is dummy proof for people like me. Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post