Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

2017 Milwaukee Eight dyno testing & information

Thread Tools
 
Search this Thread
 
  #171  
Old 08-30-2016 | 04:54 PM
1911flhx's Avatar
1911flhx
Cruiser
Joined: Feb 2015
Posts: 102
Likes: 5
From: Boise,ID
Default

Subscribed.
Can't wait to see what a proper tune does.
 
  #172  
Old 08-30-2016 | 05:13 PM
RoadsterGlide's Avatar
RoadsterGlide
Cruiser
Joined: Nov 2014
Posts: 171
Likes: 7
From: Royal Oak, Michigan
Default

Originally Posted by fuelmoto
Looking at the air cleaner we can see a complete redesign on the outside, however the changes are not only external. A new air filter design, backing plate, breather tube assembly and a larger 55mm throttle body also reside underneath the redesigned air cleaner cover. Due to the redesigned throttle body there will also need to be a newly designed high-flow Pro Billet air cleaner kit.

Take note in the third in fourth pictures the bolt in the upper right is a security allen bolt so be prepared to have one handy if you are looking to make your own changes.

-Brian









What's the potential for oil carryover in the filter on the M8 with a typical stage 1 set up?
 
  #173  
Old 08-30-2016 | 05:15 PM
soft 02's Avatar
soft 02
Seasoned HDF Member
Joined: Mar 2007
Posts: 66,948
Likes: 4,572
From: TOAK western branch
Default

Originally Posted by RoadsterGlide
What's the potential for oil carryover in the filter on the M8 with a typical stage 1 set up?
Just looking at the complete re design of the breathers id say little if any.
 
  #174  
Old 08-30-2016 | 05:17 PM
Gunnysgt's Avatar
Gunnysgt
Grand HDF Member
Joined: Oct 2009
Posts: 3,781
Likes: 572
From: Myrtle Beach SC
Default

Looks like modifying it to running an external breather would be a snap.
 
  #175  
Old 08-30-2016 | 05:17 PM
soft 02's Avatar
soft 02
Seasoned HDF Member
Joined: Mar 2007
Posts: 66,948
Likes: 4,572
From: TOAK western branch
  #176  
Old 08-30-2016 | 06:05 PM
big ron's Avatar
big ron
Tourer
Joined: May 2010
Posts: 315
Likes: 21
From: Andalusia, AL
Default

subscribed
 
  #177  
Old 08-30-2016 | 07:33 PM
1911flhx's Avatar
1911flhx
Cruiser
Joined: Feb 2015
Posts: 102
Likes: 5
From: Boise,ID
Default

Anyone else notice the tamper proof screw on that back plate?
 
  #178  
Old 08-30-2016 | 07:38 PM
soft 02's Avatar
soft 02
Seasoned HDF Member
Joined: Mar 2007
Posts: 66,948
Likes: 4,572
From: TOAK western branch
Default

Originally Posted by 1911flhx
Anyone else notice the tamper proof screw on that back plate?
Yup. Bits can be found be found just about anywhere.
 
  #179  
Old 08-31-2016 | 07:10 AM
multihdrdr's Avatar
multihdrdr
Club Member
Joined: Oct 2011
Posts: 11,019
Likes: 2,324
From: Nor Cal
Default

Originally Posted by 1911flhx
Anyone else notice the tamper proof screw on that back plate?
The Threadstarter taking the pictures and writing this up did

Originally Posted by fuelmoto
Looking at the air cleaner we can see a complete redesign on the outside, however the changes are not only external. A new air filter design, backing plate, breather tube assembly and a larger 55mm throttle body also reside underneath the redesigned air cleaner cover. Due to the redesigned throttle body there will also need to be a newly designed high-flow Pro Billet air cleaner kit.

Take note in the third in fourth pictures the bolt in the upper right is a security allen bolt so be prepared to have one handy if you are looking to make your own changes.

-Brian
 
  #180  
Old 08-31-2016 | 10:03 AM
fuelmoto's Avatar
fuelmoto
Thread Starter
|
Platinum Sponsor
Joined: Feb 2007
Posts: 7,252
Likes: 4,173
From: Little Chute, WI
Default

Originally Posted by 1911flhx
Anyone else notice the tamper proof screw on that back plate?
The tamper proof screw is used to attach the vent/screen to the airbox assembly only.
 
__________________


Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com












Quick Reply: 2017 Milwaukee Eight dyno testing & information



All times are GMT -5. The time now is 01:36 AM.