Does anyone know if the holes on the "Electra Glide" emblem (59196-65) have the same spacing as the holes for the "Ultra Classic" emblem (59236-97A)?

 

59093-00B FENDER (prime) | FF/FV ( Standard )

59087-00B FENDER (prime) | FB/FC/FR ( Ultra )

So I'd say probably :>)

 

Larry,

The problem with your deduction is that the 59093-00B has NO HOLES. The standard/classic uses a decal rather than an emblem.

 

Okee Dokee ... I stand corrected. Wouldn't be the first time. :>(

 

Yeah...the long story is I have a 2009 FLHTC. Both fenders have had the paint bubble and rust from underneath for some time.... I also had paint coming off my inner fairing...so I took the fenders and inner to a painter. He had the fenders sand blasted and the rust was bad enough on the front fenders that the tin is too thin...and I need a replacement. I happen to have a takeoff fender from my 2007 FLHTCU when I had a wreck and HD replaced anything that had a scuff or chip.

So...my original fender had no holes, the replacement does...could have the holes filled, but I would just as soon use the holes with the older emblem (not put the Ultra emblem in something that is not an Ultra).

 

Anybody knows the P/N to the "Ultra" fender emblem? Interested in the one without the posts, rather affix it to my fender using double back tape then drilling holes on my front fender.

 

I bought an '03 front UC fender and fitted the old EG metal emblems. The holes didn't match, so I had to drill a fresh one on each side, but I was able to cover the unused hole, so it isn't visible.