SE-204 Cams Feedback
#1
SE-204 Cams Feedback
Have 2010 Limited With a stage 1 A/C and Power Dual exhaust. I am planning on installing a set of SE-204 cams in the spring. Looking for some feedback from those that are or have run this setup. What tuner do you recommend? And how are their performance? Want to hear the good, bad and the ugly on power, gas mileage etc.....I do a fair amount of traveling 2 up. All feedback will be appreciated, thank you in advance.
#3
I have the 204 cams in my 2010 limited,also have the 1.72 rocker arms on mine.on the Dyno it has 114 ft lbs of torque,96 horse power.run really good.Has fuelmoto header pipe and 4inch jackpots with competition baffle.
My gas mileage is around 40 or so,maybe a little better.
I'm at work now but when I get home I can put Dyno sheet up on here.
Also a buddie of mine put them in his streetglide.with out the 1.7 rocker arms.same Dyno different day he got 109 ft lbs of torque
Don't remember the horse power
My gas mileage is around 40 or so,maybe a little better.
I'm at work now but when I get home I can put Dyno sheet up on here.
Also a buddie of mine put them in his streetglide.with out the 1.7 rocker arms.same Dyno different day he got 109 ft lbs of torque
Don't remember the horse power
Last edited by rdc401; 09-18-2016 at 07:54 PM. Reason: Adding my dyno tune no.
#4
#6
I loved them in my 09. In the 96 they were a little soft on the bottom. Not bad but the hit about 2800 and pull well up to the red line. On the slab running 75-80 i could range 220 or so out of a tank full. They are a fun bolt in cam. They ran 102 tq 92 hp in my 96" i used the sert on that bike. I run the power vision on my bikes now.
#7
Trending Topics
#8
#10