PJones. I like the look. How comfortable are they? Are they 1-1/4"?
Did you mention the model# and are they TBW throttle control? I have a 2012 FLHTP

 

http://www.lachoppers.com/catalog/di...059/index.html

They are LA Choppers Big Johnson LA7303-02, website says through 2010 TBW but I don't know what, if anything, changed from 10 to 12. They are 1-1/4 and very comfortable for me. My Indy bought them through Drag Specilaties, here's the link, says they fit through 2015

http://www.dragspecialties.com/produ...umber=06012754

For what it's worth, I used the stock cables but was not able to route the clutch cable through the fairing hole due to the angle, which bugs me a little but I'll find a rubber grommet to plug the hole. I have the bars pushed as far forward as possible without contacting the inner fairing, about a 1/4" clear.

 

Dang it the more I read and see your bike ,the more I want to try these bars out. Thanks for posting the pic.
Op have you decided on bars yet ?

 

Here is a shot of my bike with beach bars...cannot remember the make at this time and they did take some getting used to. 99 RK with batwing style fairing on the left.

 

Here is another picture for reference...if memory serves me right, these are the Chubby's RK bar.

 

deltafred Thanks for the info and pix

OP good luck with your decision and post pics when you get your new bars, This thread has me thinking about going from apes to the LA bars

 

PJones, I am ordering the LA-7303-02.
I am also going to suck it up and get the LA cable and brake extensions. I have 10" apes with stock cables. Too tight on the clutch cable. I will get the set for 12"/14" apes. Should get me a few extra inches of play.

 

Cool, interested in your take on them after you get them installed and put some miles on them.

Also would like to know how the longer cables work out and if you are able to route it through the inner fairing hole like stock

 

Will do!!!!!

 

I am interested in your opinion on these bars as well.