talk about perfect fit pushrods
#11
11-08-2015 | 04:57 AM
Seasoned HDF Member
Joined: Aug 2011
Posts: 11,793
Likes: 5,074
From: SW Ohio
I can take my 2011 Road King tank off in less than 2 minutes. That includes removing the seat to get to the bolts. No need to remove the console.
#13
11-08-2015 | 08:14 PM
Seasoned HDF Member
Joined: Sep 2009
Posts: 16,667
Likes: 5,633
From: SE Michigan
#14
11-08-2015 | 08:28 PM
Seasoned HDF Member
Joined: Mar 2010
Posts: 35,712
Likes: 5,132
From: Honah Lee
#15
11-18-2015 | 04:15 PM
Thread Starter
|
Road Master
Joined: Sep 2011
Posts: 1,033
Likes: 41
From: Mount Airy, North Carolina
Ok so I have a question for everyone. Iv seen all the video on adjusting the adjustable push rods. I know you have to adjust them on the base circle and wait for the lifter to bleed down. before turning the engine over to start on the other cylinder.
Now, I am assuming that the cam needs to be on the base circle before I put the perfect fit pushrods and torque down the rocker assembly. If I do this with brand new woods lifters, will I also need to wait for them to bleed down? I have read through my Harley service manual, briefly but didn't really recall anything other than torqueing the bolts down incremently in the proper sequence.
Now, I am assuming that the cam needs to be on the base circle before I put the perfect fit pushrods and torque down the rocker assembly. If I do this with brand new woods lifters, will I also need to wait for them to bleed down? I have read through my Harley service manual, briefly but didn't really recall anything other than torqueing the bolts down incremently in the proper sequence.
#17
11-18-2015 | 07:32 PM
Thread Starter
|
Road Master
Joined: Sep 2011
Posts: 1,033
Likes: 41
From: Mount Airy, North Carolina
Well, good question. Im purchasing from Fuel Moto. When selecting cam options it gives you a selection to choose from adjustable pushrods or perfect fit. It gives no details on the perfect fit pushrods. Ive searched their web site and cant find any info. It would be good to know.
#18
11-18-2015 | 08:12 PM
Road Warrior
Joined: Nov 2007
Posts: 1,800
Likes: 306
From: Houston, Texas
If your looking at the perfect fit, my question would be what is the advantage over using them instead of just keeping the oem push rods? If there's nothing wrong with the original, what makes the perfect fit worth the extra money?
Keep in mind that I know nothing about pushrods. I can see the advantage of ease of installation in the adjustable, but I'm just curious why you would consider replacing solid pushrods with solid pushrods?
For what it's worth, the very reputable indy I go to has always reused the oem's when replacing cams in my bikes.
Good luck with the upgrades and enjoy the new power!
Keep in mind that I know nothing about pushrods. I can see the advantage of ease of installation in the adjustable, but I'm just curious why you would consider replacing solid pushrods with solid pushrods?
For what it's worth, the very reputable indy I go to has always reused the oem's when replacing cams in my bikes.
Good luck with the upgrades and enjoy the new power!
#19
11-18-2015 | 08:31 PM
Road Warrior
Joined: May 2005
Posts: 1,301
Likes: 24
From: Minden LA
Weight on the back side of the rockers arms isn't a deal breaker with a pushrod engine, especially in the rpm range these engines operate.
I'm not saying that it isn't important, just not a big deal in the HD V-twins.
There is absolutely nothing wrong with fixed length stock type pushrods either. There is enough travel in the plungers on the stock type hydraulic roller lifters to compensate for minor variances in the parts used. I still like and use adjustable pushrods for the shear convenience of not having to take off everything above them for cam changes or lifter replacements, etc.......Cliff
I'm not saying that it isn't important, just not a big deal in the HD V-twins.
There is absolutely nothing wrong with fixed length stock type pushrods either. There is enough travel in the plungers on the stock type hydraulic roller lifters to compensate for minor variances in the parts used. I still like and use adjustable pushrods for the shear convenience of not having to take off everything above them for cam changes or lifter replacements, etc.......Cliff
Jack
#20
11-18-2015 | 08:40 PM
Thread Starter
|
Road Master
Joined: Sep 2011
Posts: 1,033
Likes: 41
From: Mount Airy, North Carolina
If your looking at the perfect fit, my question would be what is the advantage over using them instead of just keeping the oem push rods? If there's nothing wrong with the original, what makes the perfect fit worth the extra money?
Keep in mind that I know nothing about pushrods. I can see the advantage of ease of installation in the adjustable, but I'm just curious why you would consider replacing solid pushrods with solid pushrods?
For what it's worth, the very reputable indy I go to has always reused the oem's when replacing cams in my bikes.
Good luck with the upgrades and enjoy the new power!
Keep in mind that I know nothing about pushrods. I can see the advantage of ease of installation in the adjustable, but I'm just curious why you would consider replacing solid pushrods with solid pushrods?
For what it's worth, the very reputable indy I go to has always reused the oem's when replacing cams in my bikes.
Good luck with the upgrades and enjoy the new power!
I have read several posts here that Jamie at Fuel Moto says the tw-222 and other woods cams have a smaller base circle than the stock cams and stock push rods are too short.