Tick GONE!!! ROCKOUT Rocker Shaft Inserts!!!!!!
#1
Tick GONE!!! ROCKOUT Rocker Shaft Inserts!!!!!!
I have a 2012 Ultra Limited, my buddy has a 2013. We each have about 30k miles now, but have been chasing the illusive top end tick since it arrived on both of our bikes at about 10K miles. We’ve done what many have tried… Comp Cam 850-1 lifters, SE tapered adjustable push rods set to 3 ½ turns, Redline 20/60 oil (actually the oil helped a bit) and still the annoying tick. Mine had two bad spots at 1,800 and 2,600 rpm. Has driven us nuts for 3 years. The ROCKOUT Rocker Shaft Inserts went in both our bikes today and they are now both quiet as a mouse!! No tick what so ever, and I’m running Woods 222 cams to boot. The 1,800 and 2,600 rpm rattle/tick is completely gone!!!!!! This is the best $15 I have spent - hands down. Thanks BikerScum, these are the ****.
Last edited by dforeid; 10-12-2015 at 11:04 PM.
The following 2 users liked this post by dforeid:
BrownSanta (02-26-2017),
rcornelius (03-20-2017)
#2
That's AWESOME to hear!
Thanks so much for the feedback, and the compliments. The positive reviews continue to roll in.
I can picture the smile on your face
Thanks so much for the feedback, and the compliments. The positive reviews continue to roll in.
I can picture the smile on your face
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
#3
You bet. It's awesome. That sound that we all pretend isn't there.... and pretend doesn't bother us.... and convince ourselves that it's a pushrod VTwin motor and "they just do that".... is gone - all gone. It was part of the reason I spent $1K on my Biketronics speakers and Amp. Not that I regret that purchase at all, I just needed more volume to drowned out the tick!! So nice now.... sounds the way a bike should sound. My friend and I are so pumped after doing ours. Can't say enough.....
#4
WOW!
With all this positive feedback i cant wait to install the rocker lockers in my bike with a TC motor.
The powers to be @ HD should be ashamed of themselves not catching onto this & correcting mfg tolerance & or installing shouldered bolts when mfg new TC motors .
And then install rocker locker type inserts in the fld when people bring their TC bikes complaining about valvetrain noise to correct it after all the yrs the TC motors have been on the market with this issues.
But then HD would have lost big bucks on all the cams /lifters /cams etc they would not have sold along with loosing all the labor to install them along with retaining employment of many hd techs that may have been out their jobs too,who knows.
Maybe sometimes HD is smarter then we think they are!/LOL!!
Scott
With all this positive feedback i cant wait to install the rocker lockers in my bike with a TC motor.
The powers to be @ HD should be ashamed of themselves not catching onto this & correcting mfg tolerance & or installing shouldered bolts when mfg new TC motors .
And then install rocker locker type inserts in the fld when people bring their TC bikes complaining about valvetrain noise to correct it after all the yrs the TC motors have been on the market with this issues.
But then HD would have lost big bucks on all the cams /lifters /cams etc they would not have sold along with loosing all the labor to install them along with retaining employment of many hd techs that may have been out their jobs too,who knows.
Maybe sometimes HD is smarter then we think they are!/LOL!!
Scott
#5
I'm dforeid's buddy that also got the Rocker Lockers installed today. My valve train noise is also completely gone, no tick at any RPM. This is going to spread like wild fire when more people find out about this. The dealers won't be able hide the truth about the sloppy twin cam valve train tolerances any more.
Bikerscum your the man .
Bikerscum your the man .
Last edited by Old Road Toad; 10-09-2015 at 09:18 PM.
#6
I'm dforeid's buddy that also got the Rocker Lockers installed today. My valve train noise is also completely gone, no tick at any RPM. This is going to spread like wild fire when more people find out about this. The dealers won't be able hide the truth about the sloppy twin cam valve train tolerances any more.
Bikerscum your the man .
Bikerscum your the man .
Thanks guys, I really appreciate the feedback. It took me a looooong time to find the source of the problem, it really makes me happy to have helped so many out.
Just one small correction... they're ROCKOUTS, not rocker lockers. I'm partial to the name
#7
Trending Topics
#8
Thanks guys, I really appreciate the feedback. It took me a looooong time to find the source of the problem, it really makes me happy to have helped so many out.
Just one small correction... they're ROCKOUTS, not rocker lockers. I'm partial to the name
My bad on the name, sorry about that.
Just one small correction... they're ROCKOUTS, not rocker lockers. I'm partial to the name
My bad on the name, sorry about that.
Last edited by Old Road Toad; 10-10-2015 at 06:36 AM.
#9
You guys are lucky, I put the rocker lockers in mine and was hoping for this miracle, but they didn't do any thing for my ticking. Maybe I put them in backwards or something, just kidding ,I am running 259 cams with adjustables, and SE lifters, wish I could get rid of the noise. I am glad they worked for you!!
#10
You guys are lucky, I put the rocker lockers in mine and was hoping for this miracle, but they didn't do any thing for my ticking. Maybe I put them in backwards or something, just kidding ,I am running 259 cams with adjustables, and SE lifters, wish I could get rid of the noise. I am glad they worked for you!!
Thanks.