A word about installing ROCKOUT rocker shaft inserts...
#111
This is me as well. Probably best for me to keep the tank in my neighbor's garage
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
#112
Probably more risk in taking tank off. Lol
#113
I don't recall any mention of gaskets on my site, www.rockout.biz
You might have seen reference to optionally replacing breathers, best place to get both is probably your local dealer.
John @ Rockout
You might have seen reference to optionally replacing breathers, best place to get both is probably your local dealer.
John @ Rockout
Last edited by RANGER73; 05-17-2016 at 05:50 AM.
#114
So, bought these on Amazon based on all the positive things I've read here on the forum. Before the install I paid particular attention to the ticking noises between 2000-2500rpm (and others in general).
Last year I installed the woods triple deuces. Very happy with the low end torque improvement but I immediately noticed the extra "noise" but accepted the trade off.
Thought that maybe these would help and for the price what the heck.
Install was easy enough per the instructions. Did it together with a spring cleaning, three hole oil change and new plugs.
Afterwards went out for a couple hours ride and I gotta say...........no real real difference in the noise. I hear pretty much all the same noises as before.
Not disappointed. It is what it is. Maybe with the stock cams I would have had a different results but is all good.
I did see some some wear marks on the rocker support bolts but not really like those I've seen posted here.
The basic principle makes sense I don't see any reason not to try these if you think they might help. They just didn't do much for me with my set-up.
Give-em a try. It's just money and a chance to play in the garage.
Last year I installed the woods triple deuces. Very happy with the low end torque improvement but I immediately noticed the extra "noise" but accepted the trade off.
Thought that maybe these would help and for the price what the heck.
Install was easy enough per the instructions. Did it together with a spring cleaning, three hole oil change and new plugs.
Afterwards went out for a couple hours ride and I gotta say...........no real real difference in the noise. I hear pretty much all the same noises as before.
Not disappointed. It is what it is. Maybe with the stock cams I would have had a different results but is all good.
I did see some some wear marks on the rocker support bolts but not really like those I've seen posted here.
The basic principle makes sense I don't see any reason not to try these if you think they might help. They just didn't do much for me with my set-up.
Give-em a try. It's just money and a chance to play in the garage.
#115
Thank you very much for trying my kit, sorry to hear they didn't solve your ticking issues. Sometimes the noise can be coming from the lifters, valves closing on their seats, etc., I hope you can track down the source.
John @ Rockout
__________________________________________________ ____
For ROCKOUT information & purchasing please click the LINKS below...
John @ Rockout
__________________________________________________ ____
For ROCKOUT information & purchasing please click the LINKS below...
#116
Thank you very much for trying my kit, sorry to hear they didn't solve your ticking issues. Sometimes the noise can be coming from the lifters, valves closing on their seats, etc., I hope you can track down the source. John @ Rockout __________________________________________________ ____ For ROCKOUT information & purchasing please click the LINKS below...
#117
#118
Join Date: Sep 2013
Location: Great State of Canada
Posts: 6,171
Received 1,940 Likes
on
1,116 Posts
I'm afraid I don't get it.
#119
#120
Join Date: Sep 2013
Location: Great State of Canada
Posts: 6,171
Received 1,940 Likes
on
1,116 Posts