I made my own spacer from two pieces of 3/4" irrigation hose. I sliced and shortened one to narrow its circumference, installed inside the other (like a bushing). Cost me nothing as I had the hose.
Did the same and by moving the toe shifter outward you effectively get an extended shifter.
Originally Posted by Nomadmax
A lot of good posts with solutions before mine. But here's how a cheap redneck does it.
My "spacer" is the rubber part of the old heel shifter cut down a little and placed inboard of the single shifter I moved out. It works well and didn't cost me anything.
I used the HD cap on mine. As mentioned, put the heel shifter in your bag for when your toe shifter gets stripped. I have used it before and seen others have to do the same.
Did the same and by moving the toe shifter outward you effectively get an extended shifter.
there was a member on here a few years back that was turning some aluminum stock on a lathe. picked up one of those and have been transferring it from bike to bike. i like moving the shift lever out, it makes it a whole lot more comfortable for shifting. i don't feel like i'm having to turn my foot in so much to hit the shift pad.