Numbers from the 103 Build
#1
05-01-2007 | 03:48 PM
Thread Starter
|
Banned
Joined: Aug 2006
Posts: 6,642
Likes: 0
From: Fairfax County, Va.
Numbers from the 103 Build
So instead of having to go through the other pages I started a new thread. Some have asked what kit I did & the #'s......
SE cams (257's) & pistons
Skip's did the heads, ported, decked & polished, along with the valve job....as well as adjustable pushrods & whatever else those speed guys do.....LOL
HP= 110
TQ= 120
Already had the SERT w/K&N done earlier.
SE cams (257's) & pistons
Skip's did the heads, ported, decked & polished, along with the valve job....as well as adjustable pushrods & whatever else those speed guys do.....LOL
HP= 110
TQ= 120
Already had the SERT w/K&N done earlier.
#7
05-01-2007 | 09:09 PM
Ultimate HDF Member
Joined: Feb 2007
Posts: 7,663
Likes: 7
From: Northeast Ohio
Trending Topics
#9
05-01-2007 | 09:22 PM
Banned
Joined: Mar 2005
Posts: 6,100
Likes: 4
From: Boerne, Texas (Gods Country)
RE: Numbers from the 103 Build
ORIGINAL: Dalton
Impressive numbers ! And with the torque number, it should pull stumps.
Great build, anyone would be happy with those numbers.....welcome to the hotrod bagger club.
Impressive numbers ! And with the torque number, it should pull stumps.
Great build, anyone would be happy with those numbers.....welcome to the hotrod bagger club.
You've built a bad *** scooter Tow.These baggers are gonna be hell to contend with from a red light to red light.I know this,I have hell not twisting the throttle on Mine.
#10
05-01-2007 | 10:24 PM
Outstanding HDF Member
Joined: Aug 2006
Posts: 2,197
Likes: 0
From: Meridian, Idaho
RE: Numbers from the 103 Build
ORIGINAL: Towpro
So instead of having to go through the other pages I started a new thread. Some have asked what kit I did & the #'s......
SE cams (257's) & pistons
Skip's did the heads, ported, decked & polished, along with the valve job....as well as adjustable pushrods & whatever else those speed guys do.....LOL
HP= 110
TQ= 120
Already had the SERT w/K&N done earlier.
So instead of having to go through the other pages I started a new thread. Some have asked what kit I did & the #'s......
SE cams (257's) & pistons
Skip's did the heads, ported, decked & polished, along with the valve job....as well as adjustable pushrods & whatever else those speed guys do.....LOL
HP= 110
TQ= 120
Already had the SERT w/K&N done earlier.