License plate relocation on Electra glide
06-11-2015 | 09:57 AM
Joined: Oct 2011
Posts: 296
Likes: 1
From: Speedway, IN
License plate relocation on Electra glide
Anyone not using the quick detach for the tour pack? Where and how did you relocate your plate?
I'm only going to use the tour pack like 1 time a year, if that, so I really cant justify spending $500 on the whole quick detach set up.
06-11-2015 | 10:40 AM
Joined: Jun 2006
Posts: 894
Likes: 6
HD makes a laydown bracket. I think it's different on my 02 but I'm sure it's available for your bike. Search for laydown license plate kit, should get tone of hits.
06-11-2015 | 11:20 AM
Joined: Sep 2010
Posts: 14,744
Likes: 398
From: Phoenix '53, '88, '09 Big Twins
some of us use a roadking signal bar/plate mount
2010 RK bar on 2009 FLHTC:
06-11-2015 | 12:06 PM
Joined: Nov 2012
Posts: 12,565
Likes: 7,862
From: Clatskanie, OR
i put on a new fender with a frenched plate.
06-11-2015 | 07:09 PM
Joined: Jul 2014
Posts: 357
Likes: 14
From: West TN
Bought this kit from the dealership.
Bullet Rear Turn Signal Bar and License Plate Relocation Kit-53702-04A
Attached Thumbnails
06-11-2015 | 07:46 PM
Joined: Apr 2015
Posts: 11
Likes: 0
From: florida
I went simple and just bolted it to the fender. All you have to do is remove the rear bumper and line it up over the void, mark, and drill some holes. Super easy and it was FREE. I never use a tour pak so I took a 4 inch angle grinder to the hoop. Next plan is to fill it with epoxy, drill and tap a a hole, and put a spike bolt on to clean it up.
06-12-2015 | 12:28 PM
Joined: Oct 2011
Posts: 296
Likes: 1
From: Speedway, IN
Quote:
Originally Posted by
mkguitar
some of us use a roadking signal bar/plate mount
2010 RK bar on 2009 FLHTC:
I assume you found a used one?
06-12-2015 | 01:13 PM
Joined: Sep 2010
Posts: 14,744
Likes: 398
From: Phoenix '53, '88, '09 Big Twins
yes here on the forum classifieds- about $80 incl the solid red lens
2 bolts, you can reach up behind the fender with bike on the floor.
for the led plate lights ( in the round bump), I married into the connector for the tip light.
mike
06-12-2015 | 01:18 PM
Joined: Feb 2013
Posts: 11,161
Likes: 3,449
From: SE Texas
Softbrake make a plate relocation bracket that mount below the standard EG lightbar.
The following users liked this post:
06-12-2015 | 01:27 PM
Joined: Oct 2011
Posts: 296
Likes: 1
From: Speedway, IN
Quote:
Originally Posted by
TSheff
Softbrake make a plate relocation bracket that mount below the standard EG lightbar.
Yes thats what I'm looking for!