adjusting neck bearings
#1
adjusting neck bearings
im going to attempt this tomorrow. have some clunking any pretty much came to conclusion that this is the problem. checked everything else. checked out a couple you tube videos. looks pretty straight forward but you know the old saying. what can go wrong will go wrong. anybody ever done this and if so anything i should know that can jack me up. thx in advance
#2
#3
im going to attempt this tomorrow. have some clunking any pretty much came to conclusion that this is the problem. checked everything else. checked out a couple you tube videos. looks pretty straight forward but you know the old saying. what can go wrong will go wrong. anybody ever done this and if so anything i should know that can jack me up. thx in advance
Batman
#4
Here's a link to the 2011 Touring Bikes Service Manual - - http://proudfewmc.net/SiteAssets/99483-11.pdf
It has all you need to know about adjusting the bearings.
I'm guessing that your 2013 is the same as the 2011.
It has all you need to know about adjusting the bearings.
I'm guessing that your 2013 is the same as the 2011.
Thread
Thread Starter
Forum
Replies
Last Post