Yep, take a peek at the white like on the nacelle laying on the bench. That's the cut line. I'll try to shoot a better pic of it.
OK, I see what you are talking about. I would love to see the needed trimming as I have considered this modification if I could get the shark nose at a reasonable price...
Another question for you as you are working from an FLHP...do you still have the stock tach bracket? If so, would it fit with your configuration and be able to work with the bars turned side-to-side?
I made this mod to a 2-up gauge cluster and was wondering if it would fit under the area that the radio sits:
I sold the tach because it didn't work with my bars but I would guess your setup would work since that's a similiar location to the stock RG gauges. This is what I removed from the stock nacelle.
I sold the tach because it didn't work with my bars but I would guess your setup would work since that's a similiar location to the stock RG gauges. This is what I removed from the stock nacelle.
THx for the photos and the finished product looks great!