Ohlin experience less than expected
#62
I got mine from Howard, front and rear. His service was fast, he returned all my calls and even called me a few times with updates on what was going on with my parts. I thought he was easy to deal with. I had tried some of the other options out there, with bad outcomes. I will be a Motorcyclemetal customer from now on!
#63
Got my 2-#2B installed and adjusted today, they rode good for the 10 mile I rode them...hopefully will get a good ride in this coming weekend.
Howard has been helpful to me. I was very torn because there are so many good choices.
I will give these a good ride Memorial Day weekend with the wife on as well in the NC hills.
Howard has been helpful to me. I was very torn because there are so many good choices.
I will give these a good ride Memorial Day weekend with the wife on as well in the NC hills.
#64
Yep. Revival of an OLD THREAD, but that's OK, the information is still valid.
I'm a TECH in a different industry, but ft/lbs, Inches, center to center doesn't change. I ordered my 3-3s from Howard after speaking with him on the phone. Had a couple of questions - he answered the phone and answered my questions. He's busy, but he took the time and once he realized I had the correct tools and understood concepts, we had a short conversation and all was well.
Like Joe Friday said - "Just the facts". Busy people, especially techs, don't usually have time to kiss-*** and make all goo goo, but will make time for valid questions and concerns with people who are truly trying to solve an issue. If it's just a gripe session, no point.
I'd definitely deal with Howard again.
I'm a TECH in a different industry, but ft/lbs, Inches, center to center doesn't change. I ordered my 3-3s from Howard after speaking with him on the phone. Had a couple of questions - he answered the phone and answered my questions. He's busy, but he took the time and once he realized I had the correct tools and understood concepts, we had a short conversation and all was well.
Like Joe Friday said - "Just the facts". Busy people, especially techs, don't usually have time to kiss-*** and make all goo goo, but will make time for valid questions and concerns with people who are truly trying to solve an issue. If it's just a gripe session, no point.
I'd definitely deal with Howard again.
The following users liked this post:
hbsoldier3 (04-02-2018)
#65
Got my 2-#2B installed and adjusted today, they rode good for the 10 mile I rode them...hopefully will get a good ride in this coming weekend.
Howard has been helpful to me. I was very torn because there are so many good choices.
I will give these a good ride Memorial Day weekend with the wife on as well in the NC hills.
Howard has been helpful to me. I was very torn because there are so many good choices.
I will give these a good ride Memorial Day weekend with the wife on as well in the NC hills.
They do feel a little softer now that they're fully 'broken in'. I've made a few tiny tweaks to the preload, ended up giving it a full turn of more pre-load over the weekend, but they're THERE now and I'm happy with the results, both in terms of ride quality and value / $.
Last edited by seanl; 04-02-2018 at 09:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
beammeup
Ignition/Tuner/ECM/Fuel Injection
0
06-14-2015 10:30 AM