All will be checked. Anyone have a picture of the roll off switch? And I moved recently and have my manual somewhere, I just don't know where. So- which fuse?
No fuse involved. Looking at the bike in your sig, it's on the right side of the gooseneck and has 2-spade connectors with 2-wires plugged in. Just disconnect one of the wires.
Aaaand I unplugged for forward-most clip and it works.
Thanks for the help
"Forward most clip"? Are you meaning the terminal on the roll-off switch? If that was the case, also ascertain that the idle cable to which it is attached isn't adjusted too tight and causing problems with throttle response.