just joined
#1
#2
#4
Hi Fred-
Physically any fender from a touring series bike ( FLT, FLH) , 1978 to 2013 will fit.
so a matter of a color match.
This is the opportunity for a "custom" solution if you want...you can get a new or used fender, mount it up...figure out which badges or trim you want to use ( or not)...drill holes to mount the stuff- fill any unused holes...weld on the fender brace and grind off and fill the rivets. alter the mount holes so the fender sits lower ( or higher) on the wheel.
all kinds of choices.
and which most things Harley- a custom solution may cost alot less than replacing with stock parts.
ebay is always a resource, and the classified section here at the forums is good.
welcome to the forums
mike
Physically any fender from a touring series bike ( FLT, FLH) , 1978 to 2013 will fit.
so a matter of a color match.
This is the opportunity for a "custom" solution if you want...you can get a new or used fender, mount it up...figure out which badges or trim you want to use ( or not)...drill holes to mount the stuff- fill any unused holes...weld on the fender brace and grind off and fill the rivets. alter the mount holes so the fender sits lower ( or higher) on the wheel.
all kinds of choices.
and which most things Harley- a custom solution may cost alot less than replacing with stock parts.
ebay is always a resource, and the classified section here at the forums is good.
welcome to the forums
mike
Last edited by mkguitar; 02-07-2015 at 09:48 AM.
#5
Welcome. I agree with the others, get any fender that fits then take it to a paint shop. shouldn't take too long at all. i have a white 2006 yamaha road star that i bought a fairing for years ago. it was black, from the vendor, and i had the paint shop paint it to match the rest of the bike to include pin stripes. they had it about a week.
#7
It's as easy as this.
http://www.ebay.com/itm/NEW-OEM-HARL...f78be1&vxp=mtr
He also has another with a small dent in it.
http://www.ebay.com/itm/OEM-HARLEY-1...42796513&rt=nc
http://www.ebay.com/itm/NEW-OEM-HARL...f78be1&vxp=mtr
He also has another with a small dent in it.
http://www.ebay.com/itm/OEM-HARLEY-1...42796513&rt=nc
Last edited by Toofat; 02-08-2015 at 12:12 AM.
Trending Topics
#10