Micro Fiber Ugh!
#1
#2
it's polyester.
don't use anything metal ( like steel wool) to scrape or you'll marr your pipes.
a wooden scraper, warm it with a blow dryer- get the worst of it off that way
to save bandwidth, there was another thread on this the other day- read through that.
https://www.hdforums.com/forum/touri...aust-pipe.html
mike
don't use anything metal ( like steel wool) to scrape or you'll marr your pipes.
a wooden scraper, warm it with a blow dryer- get the worst of it off that way
to save bandwidth, there was another thread on this the other day- read through that.
https://www.hdforums.com/forum/touri...aust-pipe.html
mike
Last edited by mkguitar; 11-08-2014 at 11:05 AM.
#5
#7
I dropped my textile glove on my header pipe & this did the job. Mine was bad & it took about 5 applications applications.
http://www.harley-davidson.com/store/boot-scuff-remover
Like was mentioned, don't use any steel pads etc. Nothing metal either & don't fall for the penny BS.
http://www.harley-davidson.com/store/boot-scuff-remover
Like was mentioned, don't use any steel pads etc. Nothing metal either & don't fall for the penny BS.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post