Finally did my breather bypass (pics included)
10-17-2016 | 05:14 PM
Joined: Sep 2016
Posts: 224
Likes: 24
From: Black Hills
Any suggestions on the best way to cut steel braided hose? Thanks.
10-17-2016 | 05:26 PM
Joined: Jan 2010
Posts: 203
Likes: 15
From: Victoria, Australia
Quote:
Originally Posted by
BlkHillsBagger
Any suggestions on the best way to cut steel braided hose? Thanks.
Wrap it in electrical tape where you plan to cut, hold in vice with soft jaws and cut with a dremel or similar high speed cut off disc. Clean out line with compressed air.
10-17-2016 | 07:18 PM
Joined: Sep 2016
Posts: 224
Likes: 24
From: Black Hills
Cool. I have a cut-off tool for aluminum and carbon arrows. That should work. Thanks!
10-17-2016 | 07:38 PM
Joined: Apr 2010
Posts: 33,531
Likes: 3,615
From: Connecticut.
s/s braided toilet line should work nicely....comes in a variety of length's
10-17-2016 | 07:53 PM
Joined: Sep 2016
Posts: 224
Likes: 24
From: Black Hills
Thanks!
Quote:
Originally Posted by
rocket23
s/s braided toilet line should work nicely....comes in a variety of length's
Last edited by BlkHillsBagger; 10-24-2016 at 08:41 PM .
The following users liked this post:
10-17-2016 | 07:57 PM
Joined: Apr 2010
Posts: 33,531
Likes: 3,615
From: Connecticut.
true dat....here on the least coast.
10-17-2016 | 10:18 PM
Joined: Nov 2010
Posts: 17,896
Likes: 4,307
From: Red Banks, Mississippi
Quote:
Originally Posted by
BlkHillsBagger
Cool. I have a cut-off tool for aluminum and carbon arrows. That should work. Thanks!
Use painters tape or masking tape....electrical tape can leave an unwanted residue on the hose.
10-17-2016 | 10:58 PM
Joined: Jan 2010
Posts: 203
Likes: 15
From: Victoria, Australia
Quote:
Originally Posted by
DK Custom
Use painters tape or masking tape....electrical tape can leave an unwanted residue on the hose.
Thats a good tip, cheers
11-04-2016 | 07:28 PM
Joined: Jul 2012
Posts: 309
Likes: 33
From: Littleton, CO
Thanks to Head and post #251 for the pics and write up. I did mine today, had most of the parts knocking around and only had to buy the filter.
The following users liked this post:
11-04-2016 | 07:32 PM
Joined: Apr 2010
Posts: 33,531
Likes: 3,615
From: Connecticut.
it's the only thing I haven't done yet.
10-17-2016 | 05:26 PM
