Redid mine with chrome fittings from Jegs for a more uniform look. Didn't like the brass showing through. Filter is easy to clean although I haven't had any noticeable accumulation. Buddy did ask me what the filter was for and I told him it was the intake for my micro super charger. Texted me a few days later and said he couldn't find it on the internet.��

 

Here are the pics

 

I realized that today while I was installing a breather on a friends bike when it clicked what the extra 1/2" was for.

 

So let me ask you guys a question. Before I did my cam job and installed the SE billet cam plate and high volume pump, I never got oil puking out my breathers. I also installed the new Woods alpha series lifters. These lifters claim to deliver a lot more oil to the heads than stock. Since I added these mods I get lots of oil puking out the breathers. I even went as far as installing new HD breather assemblies in both heads. Didn't help at all.

 

No go. Only 1/4" longer than stock. Must be 1/2" longer than others they sell. While it screws in, not enough for my comfort.

 

Is this what everyone is doing?

 

That's what I used on my heavy breather. Completed it Monday actually.

 

You got a parts list. Looks nice and clean.

 

Like the look of that setup.
Do you have a filter on the drain line or just a free drip to outside? Thanks for any info.

 

This is an External Breather System (EBS) that I've been testing out recently.

It is one of our Premium Discrete Systems where I've replaced the filter with a catch can that has a built in filter.



I'm liking it a lot. After testing I was going to go back to the Premium Discrete, but I've decided to leave this on there.