The crew at DK were quick getting the Premium Discrete kit that I ordered out. I mean, PDQ! I ordered it Monday and it was on my porch when I got home from work yesterday. If my day goes as planned, I'll be installing it this afternoon.

 

Try to take some pics of you can Stan.

 

Glad to hear!! Cant wait to see some pics.

 

The Breather Bolts work well on some Twin Cams, and not so well on others. There is a large variance from TC to TC on how much oil comes out of the breathers. This is due to MFG. tolerances, type/weight of oil used, and how hard one rides.

Here is a link on more info on this subject-

https://www.hdforums.com/forum/oil-a...f-my-bike.html

For the Twin Cams the Breather Bolts work with any of our Outlaw Air Cleaners, and any other air cleaners that have a support bracket/backplate that is less than 3/16" thick. That means that they will Not work with the AN BS, the SE Stage 1 and all other A/C's that have a deep stand-off that the Bolts need to go through.

I run the Breather Bolts on my 2012 103 Heritage with no issues.

 

I purchased the Breather Bolts and didn't like them. I was still getting some blow-by and the exhaust smell. I went back to the stock bolts and have an open ended hose with very little drip. I need to order the nicer looking 90 degree breather bolts from DK.

 

Anyone know if the DK Premium Discrete breather kit work on a S&S Stealth air cleaner?

Also, does DK offer a discount for forum members? If so is there some way to apply the forum member discount when ordering from their website, or is it best to call them.

Thanks

 

Did a 5 hr ride with the air line separator and it worked BUT I could smell the vented gas as well as some of the gathered fluid made it through the separator. Ended up just running the vent line down to bottom of frame. This pic is of the air line separator set up I tried and did not like..
.

 

I don't see the pictures posted here.

 

get a few more posts and you'll be able to see them all

 

Got the install done. Nothing difficult here. Hardest thing is just trying different tube routing to see what you may or may not like. I'll post some of the pictures as soon as I can. Hopefully, I can get a few miles on tomorrow to see how it performs.