The Official Streetglide "Picture" Thread
#3301
The following 2 users liked this post by CrazyCarroll:
BIGDBC (02-28-2024),
gonefortheborder (03-04-2024)
#3302
The following 4 users liked this post by dukabor:
#3306
Nice ride! How do you like the 12" bars? Thinking of getting some. Are they above or at the fairing? I live in Oregon and dont want my hands in the wind too much, if it's possible with 12" bars. Thanks
#3307
@CrazyCarroll Thank you!!
So, I have not actually measured my bars, but I am guessing the size based on what I have read from multiple posts. The bars come right up to the fairing, which multiple people have said are 12s. That said, I am 6'3 and will most likely change out for 14s, but I am not hard-pressed to, as I can stand the shoulder height as is. I think pull-back and bar positioning are going to be where your hands might get affected more or less. I live in OH and actually rode the other day in 40-degree weather, and, yes, I should have known better, but I went out with a thin MX glove. Let's just say my hands were absolutely f'in freezing, it didn't feel like much of any wind protection.
So, I have not actually measured my bars, but I am guessing the size based on what I have read from multiple posts. The bars come right up to the fairing, which multiple people have said are 12s. That said, I am 6'3 and will most likely change out for 14s, but I am not hard-pressed to, as I can stand the shoulder height as is. I think pull-back and bar positioning are going to be where your hands might get affected more or less. I live in OH and actually rode the other day in 40-degree weather, and, yes, I should have known better, but I went out with a thin MX glove. Let's just say my hands were absolutely f'in freezing, it didn't feel like much of any wind protection.
#3308
22 SGS , 14 RK CVO seat and matching backrests for driver and rider and tourpak, Have lowers and chopped front fender painted, needs wet sand and polished. Fuel Moto outlaw slash ups, Pro-beam turns, Hogwerks rear fender ext, curved plate. Klockwerks 8" windshield, few other things here and there.
The following users liked this post:
RGS88 (05-26-2024)
#3309
The following users liked this post:
aguiadodeserto (06-18-2024)
Thread
Thread Starter
Forum
Replies
Last Post