Post a PIC of your bagger here
#1321
2012 fltrx road glide
2012 FLTRX ROAD GLIDE
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ICE BREAKER BAGGER
The "Ice Breaker Bagger" is our show bike that we built specifically for custom shows in Europe. So we loaded the bike into the van, went out to shows and conquered them. In addition, we did lots of test drives with this unique bike on the road and I can testify that it’s a fine “Daily driver”. We decided not to use air drive at the front and it turned out a pretty difficult task to calculate travel of the front suspension so that our specially-made front fairing wouldn’t hit the front fender. So we played with it for quite some time and conducted necessary tests until we achieved that “Air ride” look while securing street ride performance and the German TUV approval. We took this bike to the highway and pushed it to more than 100 MPH – that was crazy and it felt awesome, as if you driving something really special. So 26” front wheel at the front, matching floating 13” brake rotors and six-piston brake callipers - you can go really fast on this bike. We’ve done all documentation on this raked frame bike, so we knew from the beginning it will go nicely and without wobbling. It is really a comfortable bike owing to a drop-seat frame at the end and specially-made gas tank and side covers kit for this type of frame.
KILLER CUSTOM GIVES YOU A REASON TO RIDE!
Get the same parts we use on our builds to get that custom look for yourself at www.Killercustom.com
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ICE BREAKER BAGGER
The "Ice Breaker Bagger" is our show bike that we built specifically for custom shows in Europe. So we loaded the bike into the van, went out to shows and conquered them. In addition, we did lots of test drives with this unique bike on the road and I can testify that it’s a fine “Daily driver”. We decided not to use air drive at the front and it turned out a pretty difficult task to calculate travel of the front suspension so that our specially-made front fairing wouldn’t hit the front fender. So we played with it for quite some time and conducted necessary tests until we achieved that “Air ride” look while securing street ride performance and the German TUV approval. We took this bike to the highway and pushed it to more than 100 MPH – that was crazy and it felt awesome, as if you driving something really special. So 26” front wheel at the front, matching floating 13” brake rotors and six-piston brake callipers - you can go really fast on this bike. We’ve done all documentation on this raked frame bike, so we knew from the beginning it will go nicely and without wobbling. It is really a comfortable bike owing to a drop-seat frame at the end and specially-made gas tank and side covers kit for this type of frame.
KILLER CUSTOM GIVES YOU A REASON TO RIDE!
Get the same parts we use on our builds to get that custom look for yourself at www.Killercustom.com
Last edited by Killer Custom; 06-11-2018 at 06:43 AM.
The following users liked this post:
Bhrees (01-29-2023)
#1328
04 roadking
Yippy my 04 king has 22k original miles going have alot of work yet to do just lining things up now so far ive gone a rg fairing 6 down 6 black stretch bags 14 inch bars a 103 top end, se 255 cams oil pump i still have to get clutch cable and brake cable slam the front end 2 inches and throw on my 21 inch fat spoke and air ride the *** end and paint oh and i need a rear fender still little by little only on day 2