Posers' Coffee House, All Bullshit Accepted, Part VI
#2582
Join Date: Jul 2008
Location: On a hill among the hills, PA
Posts: 112,202
Received 1,315 Likes
on
1,030 Posts
#2584
Ok beer on the keyboard ,
#2585
Went out to eat tonite. Had ribs and wings and fries and beans...even had a beer. Gonna pay for it about 2 AM......
#2586
Join Date: Jul 2008
Location: On a hill among the hills, PA
Posts: 112,202
Received 1,315 Likes
on
1,030 Posts
#2587
Looking like I'll be riding a sporty for a while. So many things keep bumping the Glide off the priority list. All goes well, at least it'll be back in the grudge this coming week. Decided not to cut the swingarm pivot bolt off till it's out there, put it up on the high lift jack for easier access. I so didn't want to do that, but... it's stuck.
#2588
Join Date: Jul 2008
Location: On a hill among the hills, PA
Posts: 112,202
Received 1,315 Likes
on
1,030 Posts
If the swingarm pivot bolt is like mine it may have a nut on both sides on the threaded ends, can you remove them, put a spacer on onr end, then the nut, and then tighten it down with an impact or breaker bar to break it loose by drawing it out with the torque from the impact?
#2589
Join Date: Jul 2008
Location: On a hill among the hills, PA
Posts: 112,202
Received 1,315 Likes
on
1,030 Posts
Or sumbuddy else iz!!!
#2590
All the ice finally melted off the c-ment pond inna back yard....Went out today an hooked up the pump to pump all the water off the cover....Usually pump it a couple times during the winter. This year, we had so much snow an ice an cold, I never could pump it. Pump ran all day long to get it done.