Posers' Coffee House, All Bullshit Accepted, Part VI
I could use a set of those....
3/8 chrome allen bolt and a ny lock nut Herb.
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,076
Received 4,632 Likes
on
2,735 Posts
I forgot to say that, had too many plain nuts with lock washers come loose to trust those things, and lots of em on Harleys.
Evenin,
Got the slip on off, not to much effort after some advice from Ken n Imold., Thanks.
Now I gotta see what's rattlin round in there. Sounds like a screw between the heat shield and muffler.
Have to use an easy out on the shredded screws that are holding in the baffle, soft metal screws too.
Got the slip on off, not to much effort after some advice from Ken n Imold., Thanks.
Now I gotta see what's rattlin round in there. Sounds like a screw between the heat shield and muffler.
Have to use an easy out on the shredded screws that are holding in the baffle, soft metal screws too.
First time in a while I,ve gotten a look under Dina's bike...it's taken a few hits at 93,000 kilometres.
The heat shield has been scraped from front to back.
Anything on her Dyna that can make contact with pavement while it's rolling has.
The heat shield has been scraped from front to back.
Anything on her Dyna that can make contact with pavement while it's rolling has.
Nope. Been up since 4:30am, just have nothing to say and nobody to talk to