Posers' Coffee House, All Bullshit Accepted, Part VI
Join Date: Sep 2010
Location: Walker WV by way of NEW YORK CITY
Posts: 18,776
Received 42 Likes
on
36 Posts
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,075
Received 4,627 Likes
on
2,733 Posts
I got my pot stirring stick out for that one...
Morning posers. All good here, can't wait to see how bad the Lions can screw up tonight on national TV.
Join Date: Sep 2010
Location: Walker WV by way of NEW YORK CITY
Posts: 18,776
Received 42 Likes
on
36 Posts
checkin' in.......10 years divorced.........still practicing the dance I'll be using on her grave
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,075
Received 4,627 Likes
on
2,733 Posts
Just wasting time till I meet some friends for the afternoon. Won't get much accomplished today. As usual...
I'm on #2. November will be 32 years so I guess this one stuck.
If you're not on your second cup of coffee this mornin' you're already behind.
Well my buddy just traded in his 12 Ultra 103 for a 14 Limited 103 with the high output wet head motor. My 08 96 with S&S head pipes and kerker mufflers with a Andrews 48 cam would basically stay with him on a high gear roll from 60 on up to 80 where it would slowly pull away. Not anymore! These new wet heads are faster. It is all stock, not even fully broke in yet and from 60 he pulled me by 4 bikes and kept in front till about 100. I do outweigh him by 70 lbs at least but it still shows the extra power the new cams and compression make. Remember he's running a stock exhaust with cat and stock air cleaner. It's a sweet ride.Buster and I are off to check on the boiler repairs.
Stock sucks. Properly built 95 will take the 103 or 110. Only way I'm going above 95 is to open the cases for a 4.125 bore. Big bore/little stroke. Worked for the 60s musclecars