Posers' Coffee House, All Bullshit Accepted, Part VI
08-26-2014, 08:08 PM
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,075
Received 4,626 Likes
on
2,733 Posts
Gwampa, I wanna werk on motorsickles!
Ok, you can change out those cracked whatchamacallits the carbs attach to.
Lefty loosey, kid, yer never gonna get it off clockwise.
Which way's lefty? What's clockwise?
Oops, where dit go?
Murphy's Law kid, dropped parts roll under the bike, across the floor and under the freezer. If they don't bounce out the door, roll down the driveway, and fall into the storm drain...
Rushin motorsickles sure are crap, Gwampa.
I'm startin to realize that...
Ok, you can change out those cracked whatchamacallits the carbs attach to.
Lefty loosey, kid, yer never gonna get it off clockwise.
Which way's lefty? What's clockwise?
Oops, where dit go?
Murphy's Law kid, dropped parts roll under the bike, across the floor and under the freezer. If they don't bounce out the door, roll down the driveway, and fall into the storm drain...
Rushin motorsickles sure are crap, Gwampa.
I'm startin to realize that...
08-26-2014, 08:10 PM
Seasoned HDF Member
08-26-2014, 08:10 PM
Join Date: Jul 2008
Location: On a hill among the hills, PA
Posts: 112,202
Received 1,313 Likes
on
1,028 Posts
08-26-2014, 08:19 PM
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,075
Received 4,626 Likes
on
2,733 Posts
He'd of put it back together, only the holes were off on the new ones, gotta mod em a bit. And the sporty bars won't work, 'less I get a new throttle handle assy off a honda or sumptin, and rig some throttle cables to fit. Roosians just hadda squeeze the throttle end of the handle down about .025" and use a very slightly undersized throttle handle, just enuf it won't fit a standard bar. Never saw nuttin like it. Stuff's easy to reach on it, just... weird. Ain't found any tight bolts yet, sure comes apart easy... 
08-26-2014, 08:22 PM
Join Date: Jul 2008
Location: On a hill among the hills, PA
Posts: 112,202
Received 1,313 Likes
on
1,028 Posts
He'd of put it back together, only the holes were off on the new ones, gotta mod em a bit. And the sporty bars won't work, 'less I get a new throttle handle assy off a honda or sumptin, and rig some throttle cables to fit. Roosians just hadda squeeze the throttle end of the handle down about .025" and use a very slightly undersized throttle handle, just enuf it won't fit a standard bar. Never saw nuttin like it. Stuff's easy to reach on it, just... weird. Ain't found any tight bolts yet, sure comes apart easy...
08-26-2014, 09:08 PM
Seasoned HDF Member
08-26-2014, 09:26 PM
Seasoned HDF Member
08-26-2014, 09:27 PM
Join Date: Jul 2008
Location: On a hill among the hills, PA
Posts: 112,202
Received 1,313 Likes
on
1,028 Posts
I think football is gonna be a disappointment here in the Burgh this year...... hockey.... yuuup!
08-26-2014, 09:35 PM
Seasoned HDF Member