TOAK, The Thread of All Knowledge part XIV.
07-08-2023 | 08:14 PM
Road Warrior
Joined: May 2012
Posts: 1,422
Likes: 535
From: Oregon
07-08-2023 | 08:36 PM
Seasoned HDF Member
Joined: Apr 2010
Posts: 33,532
Likes: 3,617
From: Connecticut.
The following users liked this post:
Juan L (07-08-2023)
07-08-2023 | 08:55 PM
Seasoned HDF Member
Joined: Feb 2015
Posts: 12,064
Likes: 2,698
From: Traverse City
Always wear sensible shoes 
The following 2 users liked this post by Backforty:
NoRegerts (07-08-2023),
Northern Glide (07-08-2023)
07-08-2023 | 09:04 PM
Seasoned HDF Member
Joined: Apr 2010
Posts: 33,532
Likes: 3,617
From: Connecticut.
Agreed. But Harleys respond very well to reduced back pressure. It's a very primitive ICE by current standards (not that there's anything wrong with that - all my bikes fall into that category). You increase gas/air and reduce back pressure, HP goes up. It's one of the few motors that you can run straight pipes and not ruin performance.
I brought him up to the dealer. BMW s1000rx
He bought it as is no warranty with 16 k on the clock. Has fresh rubber, chain has a lot of play. 4 inches from the bottom.
So there’s that.
07-08-2023 | 09:37 PM
Moderator
Joined: Oct 2012
Posts: 107,667
Likes: 20,118
From: Ft. Worth, TX
The following 7 users liked this post by Juan L:
dennyo (07-09-2023),
nevada72 (07-08-2023),
NoRegerts (07-09-2023),
Northern Glide (07-08-2023),
RKGDCG03 (07-08-2023),
and 2 others liked this post.
07-08-2023 | 09:59 PM
Moderator
Joined: Oct 2012
Posts: 107,667
Likes: 20,118
From: Ft. Worth, TX
