TOAK, The Thread of All Knowledge Part XIII
06-21-2019, 03:15 PM
Big Kahuna HDF Member
In case you guys are too busy planning and missed it ...I HAVE A CONCRETE DRIVEWAY!!!....AND SHOULD BE ABLE TO USE IT SUNDAY EVENING.
Last edited by BARACU; 06-21-2019 at 03:16 PM.
06-21-2019, 03:15 PM
Moderator
No, no, no.......
That's ovulating and if you're able to pull that off you're a better woman than Bruce Jenner.
That's ovulating and if you're able to pull that off you're a better woman than Bruce Jenner.
06-21-2019, 03:16 PM
No plans needed ..you defeat yourself ..just by being you Tinkerbell.. now you get back too spending Mama's money.....same goes to you hose.
06-21-2019, 03:16 PM
Moderator
You worked the plan! Congratulations.
06-21-2019, 03:22 PM
Moderator
But you said you were working your plan? Didn't you observe, evaluate and plan? Now you're just going to wing it?
06-21-2019, 03:25 PM
Everybody needs a day off...
06-21-2019, 03:27 PM
Dammit, I hate when I have loose vowels.
06-21-2019, 03:35 PM
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,075
Received 4,629 Likes
on
2,734 Posts
Awesome pics Lou.
Yesturday's painting needs sanding now. Haven't painted flakeboard before, smooth turns into take your skin off after painting with latex. Half done with two coats. Other half, just one coat, let dry, sand, and then finish. Maybe it'll work with 2 coats that way, first half will need a 3rd coat after sanding the roughness off. At least it sands quick and easy with a vibrating sander.
Yesturday's painting needs sanding now. Haven't painted flakeboard before, smooth turns into take your skin off after painting with latex. Half done with two coats. Other half, just one coat, let dry, sand, and then finish. Maybe it'll work with 2 coats that way, first half will need a 3rd coat after sanding the roughness off. At least it sands quick and easy with a vibrating sander.
The following users liked this post:
soft 02 (06-21-2019)
06-21-2019, 03:36 PM
Moderator
You may be looking for the San Francisco thread.
06-21-2019, 03:37 PM