TOAK, The Thread of All Knowledge Part XIII
10-11-2022, 03:25 PM
Seasoned HDF Member
The following users liked this post:
Juan L (10-11-2022)
10-11-2022, 03:37 PM
10-11-2022, 03:49 PM
Seasoned HDF Member
the book was better or worse depending on whether you don’t like crying
The following users liked this post:
Uncle Larry (10-11-2022)
10-11-2022, 03:56 PM
I'd like more input on the mod. Catch can/dump tube, route, parts, etc.
10-11-2022, 04:22 PM
Moderator
Planning on routing the same way as the fuel overflow line to the bottom of the bike and to the open air. Not getting all fancy like Greg did.
90° Fitting https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
Barbed tee
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
Line
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
The following users liked this post:
NoRegerts (10-12-2022)
10-11-2022, 04:25 PM
Moderator
Greg, I checked the runout on my rotors today and all were less than 0.005” runout. I also have a new little tool for checking moisture in the DOT 4 brake fluid.
The following users liked this post:
NoRegerts (10-12-2022)
10-11-2022, 04:40 PM
Seasoned HDF Member
10-11-2022, 05:02 PM
Moderator
Never tried it for unintended uses.
10-11-2022, 05:15 PM
Ok, showing my ignorance, but what am I looking at?
10-11-2022, 05:19 PM
Moderator