TOAK, The Thread of All Knowledge Part XIII
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,076
Received 4,632 Likes
on
2,735 Posts
Several police and a big firetruck in the cul de sac, next door neighbor left a hot grill on her wooden deck. Now it has about a 6'x6' hole in the middle of it, burned about a 2' circle, but the firemen chainsawed well around that to reach the hot coals that had burned through. Lucky another neighbor with a better view of it than I have saw it, didn't get to burn long.
Won’t get to Florida until November one. But there might be a few Woods near the pan handle just before that .
Join Date: Jul 2011
Location: Frozelandia, Minnysota
Posts: 27,076
Received 4,632 Likes
on
2,735 Posts
When it comes to dyi projects, a man’s got to know when the stress out weighs any potential benefit . My soon to be new motto is less work, more beer. If it costs too much to hire it done, you don’t need it that bad.
Last edited by Backforty; 09-06-2022 at 04:53 PM.
The following users liked this post:
gamble71 (09-06-2022)
Are you throwing in the towel? Did your convo with customer service not solve the issues? Does your shore power work and does it charge the batteries?
Several police and a big firetruck in the cul de sac, next door neighbor left a hot grill on her wooden deck. Now it has about a 6'x6' hole in the middle of it, burned about a 2' circle, but the firemen chainsawed well around that to reach the hot coals that had burned through. Lucky another neighbor with a better view of it than I have saw it, didn't get to burn long.
When I was crewing and fixing HH-3F's in the USCG we had a sign on the shop door in Kodiak - Helicopter= 10,000 parts flying in close formation.
They gave up on troubleshooting and were going to send a new inverter under warranty to me. Being as hardheaded as I am, I decided to scrap the idea of wiring the generator in parallel and just put it thru the transfer switch the way the factory wired it. Low and behold the inverter recognizes the input. I called them back and said don’t bother send a new one . But that doesn’t end the issues. The inverter now sees the two in phase AC inputs from the generator and automatically disables L2 ( normal response) .
Last edited by Backforty; 09-06-2022 at 05:05 PM.