TOAK, The Thread of All Knowledge Part XIII
I swapped out the cig lighter/power port for a dedicated USB/PD port.
ETA: I made that white spacer out of some PVC I had laying around. Close quarters on the backside of the fairing.
A little work with a Dremel tool to open the hole. There’s no going back.
ETA: I made that white spacer out of some PVC I had laying around. Close quarters on the backside of the fairing.
A little work with a Dremel tool to open the hole. There’s no going back.
Last edited by QC; 07-02-2022 at 04:43 PM.
Join Date: Apr 2008
Location: Spartan Country, Michigan
Posts: 23,084
Received 8,296 Likes
on
6,040 Posts
First, that is an ugly bike. Do not care for yellow.
Second, I did the same on my '13 SG.....wallered out the cig lighter hole and installed USB port there. Have had half notion to do that on my '21 SG, but there is a USB port in a little compartment on the dash. Don't think I'd need another. But good job!
Second, I did the same on my '13 SG.....wallered out the cig lighter hole and installed USB port there. Have had half notion to do that on my '21 SG, but there is a USB port in a little compartment on the dash. Don't think I'd need another. But good job!
First, that is an ugly bike. Do not care for yellow.
Second, I did the same on my '13 SG.....wallered out the cig lighter hole and installed USB port there. Have had half notion to do that on my '21 SG, but there is a USB port in a little compartment on the dash. Don't think I'd need another. But good job!
Second, I did the same on my '13 SG.....wallered out the cig lighter hole and installed USB port there. Have had half notion to do that on my '21 SG, but there is a USB port in a little compartment on the dash. Don't think I'd need another. But good job!
There is a cable over in the right side glove box but it doesn't have enough power to keep my iPhone 13 charged. Found out on the way home from Chicago.
The following users liked this post:
gamble71 (07-02-2022)