TOAK, The Thread of All Knowledge Part XIII
no umbrella drinky poo. For that ****
The following users liked this post:
Uncle Larry (04-20-2022)
Join Date: Apr 2008
Location: Spartan Country, Michigan
Posts: 23,084
Received 8,296 Likes
on
6,040 Posts
Well gents, new garage door opener was picked up and installed. Used posi-tap connectors and connected wires. Then reset the old receiver and got that ready. Had wifey come out to turn switch on and then cycle hi-low beams. I showed her what to do, then climbed the step ladder to hit the reset switch while she toggled ignition and hi/low beams. For some reason the damned bike would not turn on! It would with me doing it, but not her when I was on the ladder. So she said she was cold and went back inside. I double checked instructions, and then it dawned on me I had the fob on my belt and it was too far away to let the bike turn on. So I went back inside and asked her really nice if she would come back out and help. Laid the fob on the seat and went through the routine again. This time things worked! And now I just hit the high beam to open garage! I'm happy! One less thing to do on the bike! Next is to clean well and install the plastic paint protector film I bought. But it needs be warmer for that.
@chopr147
The following users liked this post:
chopr147 (04-21-2022)
Stan, I don’t have boots on the ground, I’m flying….
Last edited by Juan L; 04-20-2022 at 05:30 PM.
Cessna 208 with the Honeywell engine upgrade instead of a PT-6.
Sherri said...all that and he has Kristi.