TOAK, The Thread of All Knowledge Part XIII
04-21-2021, 04:23 PM
Seasoned HDF Member
04-21-2021, 04:24 PM
04-21-2021, 04:30 PM
Seasoned HDF Member
04-21-2021, 04:31 PM
The following users liked this post:
nevada72 (04-21-2021)
04-21-2021, 04:34 PM
Seasoned HDF Member
04-21-2021, 04:35 PM
Join Date: Jan 2011
Location: Southeast Michigan 15 Minutes East Of Hell
Posts: 149,145
Received 49,836 Likes
on
19,329 Posts
04-21-2021, 04:47 PM
Seasoned HDF Member
Join Date: Mar 2014
Location: TOAK Northern Branch
Posts: 34,574
Received 2,087 Likes
on
1,601 Posts
Thanks Bob. They look...comfortable. 
The following users liked this post:
nevada72 (04-21-2021)
04-21-2021, 04:49 PM
Seasoned HDF Member
be awhile for that here...cold front moved thru....mid 30's overnight.
04-21-2021, 04:50 PM
Seasoned HDF Member
Join Date: Mar 2014
Location: TOAK Northern Branch
Posts: 34,574
Received 2,087 Likes
on
1,601 Posts
He must have been moving to side swipe that plow and put it on its side like it did.
04-21-2021, 04:52 PM
Big Kahuna HDF Member
G'Afternoon, Woods.....successful leveling of the dock. It was 36*, rainy and windy...perfect conditions 
Actual cutting took less than a half hour, it took me longer than that to carry all the tools back and forth. I marked the 3" section of 4 x 4 that had to come out and cut 2/3 of the way thru on the right hand side with cordless circular saw. Then I lagged a 2x4 to the top and bottom sections so weight wouldn't bind the blade when i cut the left side. Made the cuts without binding the blade, then lagged a 2x4 to the top part only of the post. Loosened the two lag bolts on the bottom right side and the dock dropped perfectly in position. Lagged the 2x4 to the bottom sections and ....done! Then the phone internet guy showed up to install new higher speed modem and had to stay another 3 hrs. he ended up changing the phone wires from my pole to the house and then the wire from my pole to the next pole down the road......I now have a blinding 22meg speed 
....beats the 6 meg I was getting. Unfortunately that's the fastest they have up in no man's land..
Actual cutting took less than a half hour, it took me longer than that to carry all the tools back and forth. I marked the 3" section of 4 x 4 that had to come out and cut 2/3 of the way thru on the right hand side with cordless circular saw. Then I lagged a 2x4 to the top and bottom sections so weight wouldn't bind the blade when i cut the left side. Made the cuts without binding the blade, then lagged a 2x4 to the top part only of the post. Loosened the two lag bolts on the bottom right side and the dock dropped perfectly in position. Lagged the 2x4 to the bottom sections and ....done! Then the phone internet guy showed up to install new higher speed modem and had to stay another 3 hrs. he ended up changing the phone wires from my pole to the house and then the wire from my pole to the next pole down the road......I now have a blinding 22meg speed ....beats the 6 meg I was getting. Unfortunately that's the fastest they have up in no man's land..