TOAK, The Thread of All Knowledge Part XI
07-16-2018, 05:33 AM
Club Member
Thread Starter
Join Date: Mar 2012
Location: Centennial, CO
Posts: 100,442
Morning, Chuck!
I think Doc is on the road with Ken and the other Posers.
07-16-2018, 05:37 AM
Join Date: Feb 2015
Location: Traverse City
Posts: 12,064
07-16-2018, 05:39 AM
Club Member
Thread Starter
Join Date: Mar 2012
Location: Centennial, CO
Posts: 100,442
A frame rail rusting through is kind of a big deal. Holy smokes. But it looks good!
07-16-2018, 05:45 AM
Join Date: Feb 2015
Location: Traverse City
Posts: 12,064
If I wanted to drop the tank out of it again, I could check and see if Chevy sells a replacement. I could cut the old one out and weld in a new one.
07-16-2018, 05:50 AM
Club Member
Thread Starter
Join Date: Mar 2012
Location: Centennial, CO
Posts: 100,442
Yeah, or have one made. Some of those cross-members are riveted in.
07-16-2018, 05:59 AM
Join Date: Feb 2015
Location: Traverse City
Posts: 12,064
Yeah, or have one made. Some of those cross-members are riveted in.
this one is a 3” tube with a few intrigue bends and welded in.
07-16-2018, 06:05 AM
Club Member
Thread Starter
Join Date: Mar 2012
Location: Centennial, CO
Posts: 100,442
Hmmm. Getting something like that may be next to impossible. Or prohibitively expensive.
07-16-2018, 06:16 AM
Club Member
Thread Starter
Join Date: Mar 2012
Location: Centennial, CO
Posts: 100,442
Well, off to shuffle. BBL&L.
07-16-2018, 06:17 AM
Join Date: Feb 2015
Location: Traverse City
Posts: 12,064
07-16-2018, 06:58 AM
Club Member
Thread Starter
Join Date: Mar 2012
Location: Centennial, CO
Posts: 100,442
Originally Posted by
RoadKing 2014
There ya go!