TOAK the Thread Of All Knowledge IX
...
* Pretty nerdy stuff:
ETL is the Extract/Transform/Load code that moves the data from source to destination and transforms it from the raw input to a uniform output. Basically, or at least in theory, it can take any format from any customer/organization and makes it the same as any other on the web site we have to show results.
* Pretty nerdy stuff:
ETL is the Extract/Transform/Load code that moves the data from source to destination and transforms it from the raw input to a uniform output. Basically, or at least in theory, it can take any format from any customer/organization and makes it the same as any other on the web site we have to show results.
Join Date: Jan 2011
Location: Southeast Michigan 15 Minutes East Of Hell
Posts: 149,239
Received 49,925 Likes
on
19,371 Posts
Okee Dokee ... Here ya go Mick ... For a number of years now, work has been proceeding in order to bring perfection to the crudely conceived idea of a transmission that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of automatically synchronizing cardinal grammeters. Such an instrument is the turbo encabulator.
Now basically the only new principle involved is that instead of power being generated by the relative motion of conductors and fluxes, it is produced by the modial interaction of magneto-reluctance and capacitive diractance.
The original machine had a base plate of pre-famulated amulite surmounted by a malleable logarithmic casing in such a way that the two spurving bearings were in a direct line with the panametric fan. The latter consisted simply of six hydrocoptic marzlevanes, so fitted to the ambifacient lunar waneshaft that side fumbling was effectively prevented.
The main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots of the stator, every seventh conductor being connected by a non-reversible tremie pipe to the differential girdle spring on the "up" end of the grammeters.
The turbo-encabulator has now reached a high level of development, and it’s being successfully used in the operation of novertrunnions. Moreover, whenever a forescent skor motion is required, it may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration.
Now basically the only new principle involved is that instead of power being generated by the relative motion of conductors and fluxes, it is produced by the modial interaction of magneto-reluctance and capacitive diractance.
The original machine had a base plate of pre-famulated amulite surmounted by a malleable logarithmic casing in such a way that the two spurving bearings were in a direct line with the panametric fan. The latter consisted simply of six hydrocoptic marzlevanes, so fitted to the ambifacient lunar waneshaft that side fumbling was effectively prevented.
The main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots of the stator, every seventh conductor being connected by a non-reversible tremie pipe to the differential girdle spring on the "up" end of the grammeters.
The turbo-encabulator has now reached a high level of development, and it’s being successfully used in the operation of novertrunnions. Moreover, whenever a forescent skor motion is required, it may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration.
The following 2 users liked this post by Uncle Larry:
Honey-Badger (09-06-2017),
soft 02 (09-06-2017)
The following users liked this post:
Uncle Larry (09-06-2017)
The following users liked this post:
zal (09-06-2017)
(.Y.)
( . Y . )
(.Y .)
( .Y.)
The following 2 users liked this post by PapaThiele:
Honey-Badger (09-06-2017),
soft 02 (09-06-2017)