TOAK- Thread Of All Knowledge- Part VI
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Oh harro.....tire frat
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Hey Lou, looking at an exploded view of the new M8's primary the compensator has been dropped down to 32 teeth. Looks like somebody was paying attention.
The following users liked this post:
soft 02 (09-01-2016)
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Re-Mornin Woods! Got busy with that damn shufflin and had to get caught up. I was at Ft Jackson and Ft Gordon in 92-93. No combat.
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Thats good news! Hope their comp holds up too. I still want to see the MDG bearing though.
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
After 12 years you had enough...or........?
Last edited by Northern Glide; 09-01-2016 at 11:49 AM.
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Lunch time scoot by.
It was gonna have to come off the rim anyway for the new tube Lou. He was just tryin' to help
If you will post a pic of the wiring underneath the access plate on the motor of your lathe I might be able to tell you how it's set up.
What do you guys use to fill the tubes? Used to be a chloride solution here but now they have gone to a glycol.
It was gonna have to come off the rim anyway for the new tube Lou. He was just tryin' to help
![Smile](https://www.hdforums.com/forum/images/smilies/smile.gif)
If you will post a pic of the wiring underneath the access plate on the motor of your lathe I might be able to tell you how it's set up.
What do you guys use to fill the tubes? Used to be a chloride solution here but now they have gone to a glycol.