If this works, it's a picture of the sensors in the bike, not exactly what supposed to be there I think.

Al

 

Tuesday after Labor Day ... Yep I got the bus "hooked up" and the tuner is werkin' great. A couple of shake down runs already in the books :>)

 

And White Castles too..

Al

 

Al, is that a bushing to take an 18mm bung down to 12mm for the O2 sensor? You have aftermarket pipes on? Looks like what i used on my heritage that had 18mm bungs.Think it is...the "other" AL....URAL

 

Strange. Looks like it has an adapter on it.

 

Soccer opening ceremonies finished. First game at 1:00.

 

It measures 18 mm on the outside threads, and the bung is 18mm.
Does appear to be on piece and no adaptor, I think.

Problem is, there's nothing to stop the sensor from screwing all the way through the bung, just sits in there not being tight.

Can't believe it's supposed to be that way.

So I need to find out if they are indeed wide band and if so, can I get wide band that look like the OEM sensor, OR can I put the OEM sensors in and not have to tune the damn thing again?


FLTRI17 says it looks like a adapter on a 14mm sensor to make it fit the 18mm hole, or something close to that.

So I need to figure out if it's a wide band and or what will work that fits.
grrrrrr

Al

Al

 

Family movie time...rented Angry Birds from Comcast On Demand.

 

Al, third pic on this page shows the difference between 12 and 18...yours doesn't look like either. http://www.thunderpress.net/motorcyc...2013/03/28.htm

 

Wide band are 4 wire and narrow band are 2 believe.