TOAK- Thread Of All Knowledge- Part VI
Hey ya Marcus. You were talking about your PC USB III earlier...
I spoke to my buddy Bernie about increasing valve size in the heads I have, cams, and doing a dyno tune. He wants to ditch the PC altogether, as he doesn't like them, and use the stock ECM..
I spoke to my buddy Bernie about increasing valve size in the heads I have, cams, and doing a dyno tune. He wants to ditch the PC altogether, as he doesn't like them, and use the stock ECM..
Join Date: Mar 2014
Location: TOAK Northern Branch
Posts: 34,574
Received 2,087 Likes
on
1,601 Posts
Morning Woods. Been absent lately with work, home life and the dreaded "W" word in the future.
Hows everyone doing?
Hows everyone doing?
Morning Tim.
Other than needing a little break from some of the rain we are getting every afternoon so I can get some mowing done, all is peachy keen here!
Other than needing a little break from some of the rain we are getting every afternoon so I can get some mowing done, all is peachy keen here!
Join Date: Mar 2014
Location: TOAK Northern Branch
Posts: 34,574
Received 2,087 Likes
on
1,601 Posts
Morning Tracy!
Getting hammered down there as well? Weather hasn't been cooperating around here either. Hopefully this weekend smartens up.
Getting hammered down there as well? Weather hasn't been cooperating around here either. Hopefully this weekend smartens up.
I may try removing the tuner and see what happens. It did run well without it and this issue with the engine light only started the day before Fathers Day. I would have to load the software on my wife's laptop since it has Windows if I were to re-flash the tuner anyway.
Join Date: Mar 2014
Location: TOAK Northern Branch
Posts: 34,574
Received 2,087 Likes
on
1,601 Posts
Yeah, he has the goodies to do that stuff.
He doesn't care much for Fuel-Moto either, but then he's a crusty old bastard and grouches about a lot of stuff