Alberta Dyno Tuners
#14
#15
Thanks for the update. I have installed a Wood 22-XE cam in my 2019 FLHTK. Using the PV 2b with a base map that FM sent me for my set up. Bike is running well Night and day diff in performance from stock. lost about 5 mpg so thought it may be running rich and would benefit from a dyno tune.
#16
Thanks for the update. I have installed a Wood 22-XE cam in my 2019 FLHTK. Using the PV 2b with a base map that FM sent me for my set up. Bike is running well Night and day diff in performance from stock. lost about 5 mpg so thought it may be running rich and would benefit from a dyno tune.
#17
Hey Cruisin1966,
I been out riding a lot and just popped in here tonight. I'm surprised by your experience at Elev8.
were you expecting more power because of components installed on/in your engine or are you running a basically stock configuration.
I know my built 107 twin cam that Elev8 tuned runs spot on from idle thru to redline.
Did you go back and talk to Ty with your concerns? He's a pretty reasonable guy.
I been out riding a lot and just popped in here tonight. I'm surprised by your experience at Elev8.
were you expecting more power because of components installed on/in your engine or are you running a basically stock configuration.
I know my built 107 twin cam that Elev8 tuned runs spot on from idle thru to redline.
Did you go back and talk to Ty with your concerns? He's a pretty reasonable guy.
#18
CR-512 lined out yet?
I know it has been a minute, but did you ever get your CR-512 dialed in?
I am still running the cam that came with my SE 128" Stage 4 package and this CR-412 cam is the latest one that has caught my interest.
Looking for a little more right after idle.
Would actually like a cam that does for the big bore exactly what the S&S 475 does for the 114" which is great low, mid and high if tuned correctly. From riding bikes with the 475 (both 107 amd 114) it feels like the best all around cam for the 107, 114 and surely the 117".
Hope all has been well, ride safe✌️
I am still running the cam that came with my SE 128" Stage 4 package and this CR-412 cam is the latest one that has caught my interest.
Looking for a little more right after idle.
Would actually like a cam that does for the big bore exactly what the S&S 475 does for the 114" which is great low, mid and high if tuned correctly. From riding bikes with the 475 (both 107 amd 114) it feels like the best all around cam for the 107, 114 and surely the 117".
Hope all has been well, ride safe✌️
#19
I know it has been a minute, but did you ever get your CR-512 dialed in?
I am still running the cam that came with my SE 128" Stage 4 package and this CR-412 cam is the latest one that has caught my interest.
Looking for a little more right after idle.
Would actually like a cam that does for the big bore exactly what the S&S 475 does for the 114" which is great low, mid and high if tuned correctly. From riding bikes with the 475 (both 107 amd 114) it feels like the best all around cam for the 107, 114 and surely the 117".
Hope all has been well, ride safe✌️
I am still running the cam that came with my SE 128" Stage 4 package and this CR-412 cam is the latest one that has caught my interest.
Looking for a little more right after idle.
Would actually like a cam that does for the big bore exactly what the S&S 475 does for the 114" which is great low, mid and high if tuned correctly. From riding bikes with the 475 (both 107 amd 114) it feels like the best all around cam for the 107, 114 and surely the 117".
Hope all has been well, ride safe✌️
Anyway I typed in CR-412 and should have been "CR-512"
"I am still running the cam that came with my SE 128" Stage 4 package and this CR-412 (should be 512) cam is the latest one that has caught my interest."
Thread
Thread Starter
Forum
Replies
Last Post
Kingercustom
Ignition/Tuner/ECM/Fuel Injection
0
07-13-2010 02:01 PM