Riding around near my city, found this beautiful spot where you can see the mountains + the sea

 

1977 XLCR CR1000 Ironhead Sportster Cafě Racer. This is my first Harley. One from the very first 250 made, from about, more or less, 3,000 or so total produced between 1977 and 1978. There were about 18 or so SOLD in 1979, but they were 1978 models with the 1979 "Ham Can" air cleaner cover on them. I installed an oil filter inline, from the Lockhart oil cooler, as there wasn't an oil filter from the factory. My model has the 2 up seat, and rear foot pegs, and a 19 tooth sprocket as options.

1999 XL883. My second Harley. I installed a Tachometer, RB Racing 2 into 1 exhaust, Screaming Eagle high flow intake, Ricor Intimidators in the front fork tubes, heavier fork oil, and a passenger backrest. The '99 883 Sportster is second from the left, next to a White 1975 Norton 850 Commando. 7 out of 9 of my motorcycles are in this photograph.

2007 XL883. I added an RB Racing 2 into 1 exhaust, and a Screaming Eagle high flow intake. I changed the Transmission pulley to a 30 tooth unit so at 80 mhp, the RPMs are at about 4,000. I added a Tachometer, as well as a Sundowner seat, and a padded, passenger backrest bar from Harley Davidson. I added Ricor Intimidators in the front fork tubes, and heavier fork oil.

2007 XL1200Low. Screaming Eagle high flow intake. Screaming Eagle exhaust. I added a Tachometer, and a Sundowner seat, and a padded, passenger backrest bar from Harley Davidson.

2009 XR1200. One of only 750. Acording to my paperwork, mine is supposed to be the very first one sold in Southern California. All my manuals are half in French, and half in English. After it was delivered, my Harley Davidson dealer asked me to please leave the bike at the dealership for a week so that people could see it, as no one else even had one on the floor to look at.

2006 XB12R BUELL FIREBOLT. It has a Sportster engine, so I included it in the post. One of only 1,056 made in 2006. I also have a 2009 Buell 1125R, one of only 1,814 made, but that has a different engine and so doesn't belong here.
​​​​​​

 

My 2010 Harley Davidson Iron 883 Sportster

 

extra rake? lowered rear? or just good photography? looks slick

 

For my sportster, lowered rear / burly slammers!

 

did you change the kickstand? i have these burly slammers in my cart on ebay. may pull the trigger on them

 

 

1983 XLX-61 restomod. Better suspension & brakes, a few intake and exhaust mods to uncork it. Tried to make it look a bit more retro in the process.

 

There;

 

2016 48