7"Headlight for 48
#12
09-15-2014 | 07:23 PM
Elite HDF Member
Joined: Aug 2011
Posts: 3,932
Likes: 43
From: Stockbridge GA
#14
09-16-2014 | 07:49 PM
Road Master
Joined: May 2012
Posts: 933
Likes: 9
From: St Louis, MO
Thanks GR , I always wondered what the little one was for.
If you want to use the mount that came with the Drag Specialties light , here's the mods needed.
You can see that the mount has to be relieved on the back at the bottom.
I cut the mount in 1/4" and 5/8" tall on the backside.
This mounts the headlight higher and farther back than the stock lower mount.
The kit doesn't come with the required bolt for the bottom mount (underneath).
The stock bolt is coarse thread and the DS is fine thread.
I used a 3/8 x 24 x 1 1/4" socket head screw with the original lock washer on mine.
Mick
If you want to use the mount that came with the Drag Specialties light , here's the mods needed.
You can see that the mount has to be relieved on the back at the bottom.
I cut the mount in 1/4" and 5/8" tall on the backside.
This mounts the headlight higher and farther back than the stock lower mount.
The kit doesn't come with the required bolt for the bottom mount (underneath).
The stock bolt is coarse thread and the DS is fine thread.
I used a 3/8 x 24 x 1 1/4" socket head screw with the original lock washer on mine.
Mick
I'm using H-D's dual bulb halogen in a Softail Slim/Fat Boy Lo shell.
#17
02-07-2020 | 12:50 PM
1st Gear
Joined: Aug 2009
Posts: 5
Likes: 0
where did u get this light? I really want to put a fat light on my 48 but got no clue where to start and dont want to waste money trying to figure it out so I hit the forums and here you are.. can you coach me up on where to buy and what to buy?
#18
02-08-2020 | 12:44 PM
1st Gear
Joined: Aug 2009
Posts: 5
Likes: 0
trying to find this headlight
hey there . . can I trouble you to tell me what kind of light this is on your 48 and where you got it. . i have been searching for a setup like this on my 48. . . and there you are... can you email me and let me know.. blu2zzday@yahoo.com im just trying not to break the bank by purchasing the wrong thing..thanks man. . i really appreciate it!!!!
Thread
Thread Starter
Forum
Replies
Last Post
user 9370
Dyna Glide Models
5
12-19-2020 10:23 AM