Pipes and Air, now what tuner?
#21
At WOT, in open loop, it will run lean with Stage 1 mods. At least this was the case for me.
I have the dyno run and A/F graph to prove it.
You're obviously not good at reading comprehension in general.
Last edited by jdub099; 04-01-2014 at 12:14 PM.
#22
I have been reading all these things as a newbie who just got his first Harley and a lot of these things have been very helpful to learn some new things, I want to get the Stage 1 kit for my bike, and have been looking at the different opinions about XiEds and stuff, so how is that towards performance, does it change the top speed, makes the bike faster? And does the Xieds require professional installation? or you can just install that with the air kit and the pipes on your own?
thanks
thanks
#23
The XIED will only make his bike not run lean in closed loop, which is everywhere but WOT. XIEDs do not have any effect on open loop operation.
At WOT, in open loop, it will run lean with Stage 1 mods. At least this was the case for me.
I have the dyno run and A/F graph to prove it.
You're obviously not good at reading comprehension in general.
At WOT, in open loop, it will run lean with Stage 1 mods. At least this was the case for me.
I have the dyno run and A/F graph to prove it.
You're obviously not good at reading comprehension in general.
#24
What is involved to pull the "snorkel restrictor on the ham can" & Where exactly did you "drill those holes" the backing plate? Free mods I can do myself are my favorites. I already shortened my baffles to 6" long, pulled the Fiberglass packing from the muffler pipes and reinstalled the baffles with rivets. My owners manual says I can re use the stock air cleaner, its says to rinse/wash it in light soap/detergent. rinse thouroghly and let dry or blow dry. I guess the stock paper air intake filters are built different than they used to be?
Thanks
Last edited by riderboy1961; 04-01-2014 at 02:16 PM.
#25
#26
#27
#28
Dusty Bones; What is involved to pull the "snorkel restrictor on the ham can" & Where exactly did you "drill those holes" the backing plate? Free mods I can do myself are my favorites. I already shortened my baffles to 6" long, pulled the Fiberglass packing from the muffler pipes and reinstalled the baffles with rivets. My owners manual says I can re use the stock air cleaner, its says to rinse/wash it in light soap/detergent. rinse thouroghly and let dry or blow dry. I guess the stock paper air intake filters are built different than they used to be? Thanks
Stock filters will last along time washing them.
#29
That's what tuner advertisements say, gets people to buy their product. Go to nite rider and read up on how the stock Harley tune does relearn for pipes and intake.
#30
Good luck with that...
Also point me to where on their website it says that it can learn for an exhaust system and intake. Couldn't find that. I did find this:
If you are one of the many motorcyclist’s that make changes to the exhaust system, air filter, camshaft(s) or other engine components, you’ll need to find a way to alter the fuel map.
Last edited by jdub099; 04-01-2014 at 07:24 PM.