What did you do to Your Sportster Today?
The following users liked this post:
Rob Roy's Revenge (07-05-2024)
The following 3 users liked this post by handirifle:
Finally getting rid of my rigged up Tenere license plate holder. Found an Amazon folding side mount plate kit, kind of a cheap roadster copy.
Bad part is my existing splice is soldered and heat shrinked. Hoping to get the wiring done and ride up to lake zen for some early morning mind cleaning.
Bad part is my existing splice is soldered and heat shrinked. Hoping to get the wiring done and ride up to lake zen for some early morning mind cleaning.
Wisamic (Black) Led Headlight installed on my '07 1200N.
Before & After photo attached.
Easy install.
Noting the prongs of the Wisa are longer than the OEM halogen, yet secure, and there was plenty of room for the connector and wiring in the HL bucket.
of the Wisa.
So I applied di-electric grease, wrapped in vinyl electrical tape, and secured the tape from unfroughing with a zip tie.
Bonus Photo:
HD Chrome loud horn, crash/ engine guard, oil cooler, Screaming Eagle plug wires, passenger pegs (matching OEM), passenger pillion, sissy bar, emulsion shocks.
Before & After photo attached.
Easy install.
Noting the prongs of the Wisa are longer than the OEM halogen, yet secure, and there was plenty of room for the connector and wiring in the HL bucket.
of the Wisa.
So I applied di-electric grease, wrapped in vinyl electrical tape, and secured the tape from unfroughing with a zip tie.
Bonus Photo:
HD Chrome loud horn, crash/ engine guard, oil cooler, Screaming Eagle plug wires, passenger pegs (matching OEM), passenger pillion, sissy bar, emulsion shocks.
Last edited by Kenny94945; 07-05-2024 at 12:41 PM.
The following 2 users liked this post by Kenny94945:
BlueridgeXL (07-06-2024),
Rob Roy's Revenge (07-05-2024)
Finished up the tag mount and had a nice ride up to the lake. A bit wet with a few showers and soaked roads, the Shinkos ain’t too shabby.
A touch over 200 miles and I’m starting some auto-tunes today, after installing the stock speedo (Koso tach won’t let PV connect).
So damn hot here running hours are between 0700-1100. Had a 103 index yesterday afternoon, too damn hot to ride.
A touch over 200 miles and I’m starting some auto-tunes today, after installing the stock speedo (Koso tach won’t let PV connect).
So damn hot here running hours are between 0700-1100. Had a 103 index yesterday afternoon, too damn hot to ride.
The following 3 users liked this post by BlueridgeXL:
I rode it around 130 miles or so. Beautiful day here today!
Started noticing that the security system light on the speedo was coming on, and then going off and the bike does not have a security system on it. Ends up it was the front brake light switch sticking on, code 62262 in the BCM. I did not know that the security light coming on was an indicator of an issue unrelated to the EMC. Live and learn.
Flushed out the brake light switch with spray silicone this evening, cleared the code and everything seems back to normal. Knock on wood...
Started noticing that the security system light on the speedo was coming on, and then going off and the bike does not have a security system on it. Ends up it was the front brake light switch sticking on, code 62262 in the BCM. I did not know that the security light coming on was an indicator of an issue unrelated to the EMC. Live and learn.
Flushed out the brake light switch with spray silicone this evening, cleared the code and everything seems back to normal. Knock on wood...
The following 3 users liked this post by firehawk6: