What did you do to Your Sportster Today?
#1223
Today I put round pegs on my newly installed HD forward controls.
I was using the stock mini-floor boards from my 2015 XL1200T, but the floorboard were not horizontal, rather it was tilted slightly downward in the front. I didn't like that. Also, to use either the mini-floorboards or round pegs I had, I had to grind down one of the peg holding tangs. The controls are now exactly as I want them to be. Thanks for asking!
I was using the stock mini-floor boards from my 2015 XL1200T, but the floorboard were not horizontal, rather it was tilted slightly downward in the front. I didn't like that. Also, to use either the mini-floorboards or round pegs I had, I had to grind down one of the peg holding tangs. The controls are now exactly as I want them to be. Thanks for asking!
#1225
Installed an MPS quick shifter with custom mounts from Chainsikle to compliment my STM slipper clutch:
490lbs, 103HP/87TQ Hammer 1250/Smash Heads, 30° dome pistons, 10.75:1 CR, Air Hammer w/K&N A/C, SE .575 cams, Baisley ported intake manifold, STM slipper clutch/Müller Power Clutch, MPS Racing quick shifter with custom mount from Chainsikle, Drag Specialties alternator rotor w/34T sprocket, Drag Specialties ISO motor mounts, D&D Bobcat exhaust, custom Trac Dynamics aluminum swingarm, Chainsikle rearsets with custom mounts, Oberon foot pegs, custom 14" Ricor IAS shocks/Intiminators/RaceTech fork springs, custom GLIDE forged aluminum wheels, Avon Storm 3D XM ZR radials, XR1200 front caliper/floating rotor, Braking Wave XR1200 rear rotor, EarthX lithium battery, Burly Clubman bars, Rizoma Spirit bar end mirrors, HD Dual speedo/tach & ergo's - Bikini Fairing/Chin spoiler/Black Diamond grips/Brawler seat. Eats twinkies for breakfast.
490lbs, 103HP/87TQ Hammer 1250/Smash Heads, 30° dome pistons, 10.75:1 CR, Air Hammer w/K&N A/C, SE .575 cams, Baisley ported intake manifold, STM slipper clutch/Müller Power Clutch, MPS Racing quick shifter with custom mount from Chainsikle, Drag Specialties alternator rotor w/34T sprocket, Drag Specialties ISO motor mounts, D&D Bobcat exhaust, custom Trac Dynamics aluminum swingarm, Chainsikle rearsets with custom mounts, Oberon foot pegs, custom 14" Ricor IAS shocks/Intiminators/RaceTech fork springs, custom GLIDE forged aluminum wheels, Avon Storm 3D XM ZR radials, XR1200 front caliper/floating rotor, Braking Wave XR1200 rear rotor, EarthX lithium battery, Burly Clubman bars, Rizoma Spirit bar end mirrors, HD Dual speedo/tach & ergo's - Bikini Fairing/Chin spoiler/Black Diamond grips/Brawler seat. Eats twinkies for breakfast.
#1226
#1227
Yes I was asking about Outtakes speedo relo. Not that I am going to relocate my speedo. Just thought it was a new gadget...lol. Thanks
Last edited by hscic; 05-25-2015 at 02:43 AM.
#1229
#1230
Diggin those bullet pegs