Handlebar suggestions
#21
That is a Vulcan W-G on the bike above. I would have to believe the bars would fit the SuperLow just fine...that bike uses standard risers unlike the 48, correct? I don't have the number at hand, but Santee Wide-n-Low should suffice for search purposes. I think those bars came from either JP Cycle or Phats.
#22
Replacement handlebar suggestion
On my Superlow I've replaced the original handlebar with the HD cod 56051-06 that fit perfectly and is not expensive. (see attachements for details)
#23
That is a Vulcan W-G on the bike above. I would have to believe the bars would fit the SuperLow just fine...that bike uses standard risers unlike the 48, correct? I don't have the number at hand, but Santee Wide-n-Low should suffice for search purposes. I think those bars came from either JP Cycle or Phats.
#24
What about a 1200C without changing the stock riser? What bar (part # please) would give me a little more rise and pullback that I can get away with and NOT have to change the wires as they seem to be the more limiting item? I don't mind having to change the brake line, and there seems to be some length in the throttle and clutch to deal with. I believe I read the extended reach bar works but I don't think it's enough. Anyone with real world experience? I love the forwards, and I am 5'8". Just need some suggestions from someone who has done this and pics if possible. I have read a lot of threads and still it is not clear. TIA
#25
What about a 1200C without changing the stock riser? What bar (part # please) would give me a little more rise and pullback that I can get away with and NOT have to change the wires as they seem to be the more limiting item? I don't mind having to change the brake line, and there seems to be some length in the throttle and clutch to deal with. I believe I read the extended reach bar works but I don't think it's enough. Anyone with real world experience? I love the forwards, and I am 5'8". Just need some suggestions from someone who has done this and pics if possible. I have read a lot of threads and still it is not clear. TIA
#26
I'm watching this too. I have 2013 custom. Can only find specs on riser for mine.
Looking at HD 56021-04b - custom pull-back and HD miniape 56079-93t and several alternatives from jp. Kind of wondering if the custom pull-back is standard.?.
Coming from an 09low which had really harsh ride but perfect seating position for me - this 2013 is a stretch for both feet and hands . I'm hoping moving hands back will make it tolerable.
Looking at HD 56021-04b - custom pull-back and HD miniape 56079-93t and several alternatives from jp. Kind of wondering if the custom pull-back is standard.?.
Coming from an 09low which had really harsh ride but perfect seating position for me - this 2013 is a stretch for both feet and hands . I'm hoping moving hands back will make it tolerable.
Last edited by rednred; 11-19-2013 at 07:03 PM.
#29
#30
Thread
Thread Starter
Forum
Replies
Last Post