Sportster Models 883, 883 Custom, 1200 Custom, 883L, 1200L, 1200S, 1200 Roadster, XR1200, and the Nightster.
Sponsored by:
Sponsored by:

Ride-On tire Balancer and Sealant

Thread Tools
 
Search this Thread
 
  #1  
Old 11-26-2012 | 09:18 PM
joebotics's Avatar
joebotics
Thread Starter
|
Road Warrior
Joined: Mar 2009
Posts: 1,407
Likes: 54
From: Vallejo, California
Default Ride-On tire Balancer and Sealant

Hey fellas... I am re-posting this information from Olongapo1 forum member on the Sloptail side:

I've just tested a new product. Ride-On Tire Balancer and Sealant. This is a liquid product you inject into your motorcycle tire through the valve stem. Once installed, it Dynamically balances your tires as you ride, and keeps the tire balanced for the life of the tire regardless of tire wear. Additionally it also acts as a tire sealant in case of a puncture.

Previous products such as Green Slime tire sealant, were problematic as tires could not be balanced once the product was installed.

I recently mounted a new tire on the rear of my Fatboy and installed this product. Ride-On for motorcycle tires is sold in an 8 ounce bottle. My tire size required 9 ounces and I had to open a second bottle however the leftover product in the bottle will remain usable. The manufacturer warns that vibration may be felt for the first 2 or 3 miles until the product is spread through the tire from centrifugal forces. I did not experience this. Rode the bike Sunday, speeds up to 80 mph completely vibration free. I can attest that the balancing properties of this product work. I'm not going to punch holes in my new tire to test the sealing properties but there are many YouTube videos demonstrating this feature. One video is of a bullet shot into a tire which sealed itself.

I purchased Ride-On through JP Cycles. A little pricy at 15 dollars a bottle but in my opinion worth the cost. For a little over 30 buck per bike, I can ride with balanced tires and not worry about roadside flat tire repairs.

Check out the link.
http://www.ride-on.com/motorcycle-formula-mot.html
.
.
 
  #2  
Old 11-27-2012 | 07:56 AM
Ergonight's Avatar
Ergonight
Road Master
Joined: Jul 2011
Posts: 1,167
Likes: 7
From: NY
Default

Good tip Joe. Thanks for posting this. I got a nail in my rear tire on my last ride of the season, right in the area where Ride-On says it would have sealed it. Think I'll give it a try.
 
  #3  
Old 11-27-2012 | 07:59 AM
Notgrownup's Avatar
Notgrownup
Seasoned HDF Member
Joined: Mar 2009
Posts: 23,567
Likes: 7,245
From: Snow Hill, NC
Default

Been running it for over a year now...haven't had a puncture but bike rides fine...
 
  #4  
Old 11-27-2012 | 08:02 AM
1forrest1's Avatar
1forrest1
Advanced
Joined: Sep 2012
Posts: 61
Likes: 0
From: portland
Default

I'm putting new skins on my hugger, and am leaning toward run flat. I like the sealing properties that it provides. Thanks for the very timely report.
 
  #5  
Old 11-27-2012 | 02:25 PM
joebotics's Avatar
joebotics
Thread Starter
|
Road Warrior
Joined: Mar 2009
Posts: 1,407
Likes: 54
From: Vallejo, California
Default

the cool thing is that it works on both tube and tubeless tires...
.
.
.
 
  #6  
Old 11-27-2012 | 03:51 PM
Ergonight's Avatar
Ergonight
Road Master
Joined: Jul 2011
Posts: 1,167
Likes: 7
From: NY
Default

Ya man. I confirmed that before I ordered it. And I just got the email saying they shipped it. Pretty quick service.
 
  #7  
Old 11-27-2012 | 04:21 PM
DMetcalf's Avatar
DMetcalf
Road Captain
Joined: Apr 2009
Posts: 669
Likes: 16
From: Princeton, Texas
Default

I have been using this product for 2 years and I think it works well. I change my own tires and can see for myself that it does not leave a big mes like some people think it leaves. The clean up is minimal in my humble opinion. Thumbs-up here ..!
 
  #8  
Old 11-27-2012 | 09:21 PM
1forrest1's Avatar
1forrest1
Advanced
Joined: Sep 2012
Posts: 61
Likes: 0
From: portland
Default

ordered after I posted this morning, came home from work and got the shipping e mail, fast and easy
 
  #9  
Old 11-27-2012 | 11:55 PM
baka1969's Avatar
baka1969
Extreme HDF Member
Veteran: Navy
Joined: Jan 2012
Posts: 12,986
Likes: 705
From: NE Philly
Default

Originally Posted by DMetcalf
I have been using this product for 2 years and I think it works well. I change my own tires and can see for myself that it does not leave a big mes like some people think it leaves. The clean up is minimal in my humble opinion. Thumbs-up here ..!
It doesn't effect or corrode the wheels in any way? Aside from the sealant does anyone know how it would compare to Dyna Beads?
 
  #10  
Old 11-28-2012 | 10:23 AM
1200Cdriver's Avatar
1200Cdriver
Road Warrior
Joined: Oct 2007
Posts: 1,599
Likes: 10
From: Colonial Beach, Virginia
Default

I would feel safer with the DK's Dyna Beads, if the Ride On can seal leaks that is an indication that it can, "set up" in the presence of air. Not good in my opinion.
 


Quick Reply: Ride-On tire Balancer and Sealant



All times are GMT -5. The time now is 04:22 PM.