Highway Pegs/Mounting Options
#12
05-21-2012, 01:30 PM
The ones you're showing on the HD link look like they belong on a bagger or something else with floorboards and engine guard not you sporty. I got some chrome units just for a sporty with mids straight out of the HD catalog that I love. They bolt right up the the frame just in front of the front motor mount, 3 way adjustability. Fit & finish are perfect. Sorry don't have a part number. They were around $200.
#13
05-21-2012, 07:40 PM
Join Date: Aug 2011
Location: New Jersey
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I don't have an engine guard and won't be getting one. The RIVCO frame mount setup sounds like what I want but I'm not positive that it will work. They are also a little expensive so I definitely want to be sure it's going to work out.
#14
05-21-2012, 09:51 PM
Join Date: Aug 2011
Location: New Jersey
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
#16
05-22-2012, 06:28 AM
Most of the ones listed, and mine are for 04-up XL, it appears you can use the Rivco's for 2003...
Fitment Details
- all Harleys
Important Fitment Details:
Fit all Harley models with 1 ¼’ frames - XL Sportsters through 2003 (except Custom), FX Softail models, FLS Rocker, Duece, Deluxe, Cross Bones, Fat Boy Softail models.
#17
05-22-2012, 06:29 AM
In print on the bottom of the page:
Fitment Details
- all Harleys
Important Fitment Details:
Fit all Harley models with 1 ¼’ frames - XL Sportsters through 2003 (except Custom), FX Softail models, FLS Rocker, Duece, Deluxe, Cross Bones, Fat Boy Softail models.
#18
05-22-2012, 11:22 AM
Join Date: Aug 2011
Location: New Jersey
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
That is what I am trying to find out.
Warrick, I saw the fitment details that you highlighted, but it also mentions that they will fit many other Harley models that have a 1-1/4 inch frame. I looked closely at the pictures that are shown for the Rivco setup and then looked at my Iron to see if it will work. It looks like it might be a tight fit due to wiring and other "stuff" that might be in the way.
Warrick, I saw the fitment details that you highlighted, but it also mentions that they will fit many other Harley models that have a 1-1/4 inch frame. I looked closely at the pictures that are shown for the Rivco setup and then looked at my Iron to see if it will work. It looks like it might be a tight fit due to wiring and other "stuff" that might be in the way.
#19
05-22-2012, 11:38 AM
Advanced
Join Date: Apr 2012
Location: Cartersville, GA
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Same set up on eBay with Pegs
this will probably be your cheapest way if you don't have some pegs laying around...
same set up as the other link on eBay, but this one includes pegs.
http://www.ebay.com/itm/Harley-SPORT...r#ht_536wt_922
same set up as the other link on eBay, but this one includes pegs.
http://www.ebay.com/itm/Harley-SPORT...r#ht_536wt_922
#20
05-22-2012, 12:16 PM
Those are the same ones I have except mine are chrome. If you get them from Harley they come without the pegs - it's just the mounts. Then you have to purchase pegs seperately so yea it's a little expensive but like I said fit is perfect, very sturdy and it's nice to have options for foot positioning.
Thread
Thread Starter
Forum
Replies
Last Post
