no power in run mode
#1
Blown circuit breaker?
Hello all. Newbie here.
99 Sportster 883, 10k. Had the bike running on 3/4 enricher to warm up. Bike was running smoothly for about ten minutes. I was walking over to turn the enricher off or down, and the bike just shut off. Now I have power in the accessory mode on the ignition switch, but no power in the on/run position. I'm thinking I blew the main circuit breaker.
Anyone ever have this happen?
anyone know how I test the breaker to make sure it is blown before I start throwing parts at her?
Thanks!
ride safe.
99 Sportster 883, 10k. Had the bike running on 3/4 enricher to warm up. Bike was running smoothly for about ten minutes. I was walking over to turn the enricher off or down, and the bike just shut off. Now I have power in the accessory mode on the ignition switch, but no power in the on/run position. I'm thinking I blew the main circuit breaker.
Anyone ever have this happen?
anyone know how I test the breaker to make sure it is blown before I start throwing parts at her?
Thanks!
ride safe.
Last edited by dlajwa; 03-20-2012 at 10:18 AM.
#2
That's strange. Ive never seen it. Hope some one else can help you. A bump at the least. Good luck.
__________________
General Inquiries:
Info@LongRideShields.com
Sales and Marketing:
Sales@LongRideShields.com
Phone:
775.331.3789
General Inquiries:
Info@LongRideShields.com
Sales and Marketing:
Sales@LongRideShields.com
Phone:
775.331.3789
#3
Thread
Thread Starter
Forum
Replies
Last Post